Specification

SPECIFICATION SHEET
Broan Hartford, Wisconsin www.nutone.com 888-336-3948
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
FEATURES
GRILLE & LIGHTING:
•
Brighter white grille
•
Snap-in light diffusing lens
•
One 100-watt (max.) E26 base bulb. (Bulb not included.)
VENTILATOR:
•
Resilient anti-vibration mounts
•
Plug-in, permanently lubricated motor
•
High performance blower wheel
HEATER:
•
1500 watts, with metal blower wheel for efficient, even heating
•
Rotatable heater grille - direct heat where needed
•
Plug-in, permanently lubricated motor - functions independent
of ventilator
HOUSING:
•
Rugged galvanized steel housing
•
Polymeric, 4" round damper/duct connector
•
5-7/8" height allows for 2" x 6" (nominal) joist installations
•
Sturdy, easy, four-point mounting direct to joist
•
Hanger bars allow housing to be positioned anywhere
between 16" to 24"-on-center joists
•
Suitable for use in insulated ceilings (Type I.C.).
•
Use Model 66V (Ivory) / 66W (White) Three Function Control
NOTE: This product must be mounted in a flat ceiling only.
Installation in ceilings 9-foot high or less will provide maximum
comfort. Do not mount this product in a wall.
91D 1101139A
TYPICAL SPECIFICATION
Combination unit shall be NuTone Model 765H110L.
Unit shall have galvanized steel housing and adjustable
mounting brackets.
Unit must be rated to handle a 100-watt (max.) lamp.
Fan, heater, and light shall be separately controllable.
Motor shall be permanently lubricated.
Heater to deliver 1500 Watts of fan-forced heat.
Air delivery shall be no less than 110 cfm and sound
levels no greater than 2.0 sones. All air and sound ratings
shall be certified by HVI.
Unit shall be UL listed.
Combination unit to be suitable for use in insulated
ceilings. (Type I. C.)
MODEL 765H110L
VENTILATION FAN
WITH LIGHT AND HEATER
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and
procedures prescribed by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product performance is rated
at 0.1 in. static pressure, based on tests conducted in a state-of-the-art
test laboratory. Sones are a measure of humanly-perceived loudness,
based on laboratory measurements.
SPECIFICATIONS
* Total connected load.
(Requires a dedicated 20-Amp circuit.)
STATIC
PRESSURE
CFM SONES
0.1 110 2.0
0.25 97 2.5
VOLTS AMPS* DUCT
120 14.0 4-in. round