Specifications

Broan Hartford, Wisconsin www.broan.com 800-558-1711
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
SPECIFICATION SHEET
02C 1101902D
MODEL AE80LK
FLEX
TM
SERIES
FAN / LIGHT
DESCRIPTION
BLOWER:
• Plug-in, permanently lubricated motor - engineered for
continuous operation
• Dynamically balanced centrifugal blower wheel for quiet,
efficient performance
• Low RPM for quiet operation
HOUSING:
• Rugged, 26 gauge, galvanized steel construction
• Polymeric, 4” duct connector with tapered sleeve and no
metallic clatter
• 5-3/4” height allows for 2” x 6” ceiling installations
• Sturdy, easy, four-point mounting directly to joist
• Can be mounted in ceilings up to 7/12 pitch
GRILLE:
• Polymeric construction
• Innovative design - the result of extensive research with
designers and consumers
• 11-Watt integrated LED lighting for energy efficiency
• 3500K color temperature provides soft white light - ideal for
bathroom illumination
• LED lasts up to 25,000 hours for maintenance-free
convenience
CONTROLS (Purchase separately):
• Refer to Broan’s catalog for a complete line of accessories
to effectively adapt these fans to your construction
requirements
DIMMING CONTROLS:
• May not be compatible with all dimmer controls
• Each application is unique and various factors such as
load, common neutrals or other electrical products on the
circuit can, in certain instances, cause variance in system
performance
• Dimmer model numbers vary slightly depending on color,
packaging type, etc. such that variations of Model numbers
may be suitable. Consult dimming system manufacturer for
additional support in operation
* For a list of compatible controls, see broan.com
U.L. Listed for use over bathtubs and showers when connected
to a GFCI protected branch circuit (ceiling mount only)
U.L. Listed for use in insulated ceilings (TYPE I.C.)
3-Year Warranty
JA8-2019
TYPICAL SPECIFICATION
Fan / Light shall be Broan Model AE80LK.
Fan / Light shall have corrosion resistant galvanized steel
housing with four-point mounting capability. It shall be ducted to
a roof or wall cap using 4” round ductwork.
Blower assembly shall be removable, have a centrifugal-type
blower wheel and a permanently lubricated motor designed for
continuous operation.
Non-metallic damper/duct connector shall be included.
LED module shall be 11-Watt with 3500K color temperature and
800 lumen output (min.).
Air delivery shall be no less than the airflow values and
no greater than the sound level values listed in the HVI
Performance Specifications provided in this specification (see
following chart). All air and sound ratings shall be certified by
HVI.
Ceiling Ventilator shall be U.L. Listed for use in insulated ceilings
(Type I.C.) and for use over bathtubs and showers when
connected to a GFCI protected branch circuit.