Unit installation

11
FLOOR INLET INSTALLATION
FLOOR
SUB-FLOOR
2
9
/16"
3
1
/16"
INLET
EXTENSION
FLOOR
INLET
FRAME
MOUNTING
BRACKET
SEAL
FLANGED
FITTING
FIGURE 40
CUT TO
LENGTH
EXTENSION
SLEEVE
FLANGED
FITTING
MOUNTING
BRACKET
FLANGE
FIGURE 41
WALL
INLET
EXTENSION SLEEVE
BRACKETFLANGED FITTING
TUBING
FIGURE 42
FINAL SYSTEM CHECK
Be sure all inlets are closed and soil bag is in place. Check
switch on power unit for manual on/off operation.
Check each wall inlet to be sure contacts activate power unit
when hose is inserted and switched on, if applicable. If Central
Cleaning hose is not available at the time, a short piece of wire
can be used to short contacts in wall inlet to activate power unit.
Check each wall inlet and tubing connection for air leaks. Check
power unit for leaks around inlet tube and dirt receptacle.
Make sure the filter bag is properly installed in the power unit
according to directions printed on the bag or in homeowner’s
manual. Remove the extra bag and owner's manual from the
power unit dirt receptacle. It may be convenient to store them
with the cleaning tools and accessories.
Now it’s time to enjoy the benefits of a NuTone Central Cleaning
System.
INLET