Instructions / Assembly

Page 4
VENTILATION FAN / LIGHT MODEL QTN130LE1
SERVICE PARTS
99045435A
Key No. Part No. Description
1 97020009 Housing
2 97018331 Duct Connector - 6”
3 97018721 Parts Bag
(includes wiring plate & all screws)
4 97018448 Wire Panel/Harness Assembly
5 97020010 Blower Assembly
6 97020001 Grille Assembly
(includes key nos. 7 & 8)
7 99140208 Grille Spring (2 req’d)
8 99111512 Lens
9 97018014 Spacer (2 supplied)
10 99111513 Duct Reducer - 6” to 4”
11 99271381 Bulb, GU24, 18W Fluorescent (2 req.)
INSTALL GRILLE
6. Attach grille to housing.
Plug light into receptacle. Squeeze grille springs and insert
them into tabs on each side of housing.
Order service parts by “Part No.” - not by “Key No.”
Replacement parts
can be ordered on our
website. Please visit us
at www.broan.com
1
2
3
3
3
5
6
7
9
9
10
8
11
3
4
8. Remove
light lens.
Carefully insert a
small flat-blade
screwdriver
between grille
and lens. Pry
lens out.
7. Push grille
against
ceiling.
9. Install light
bulbs.
Product includes
(2) 18W (max.),
type GU24
fluorescent bulbs
with M.O.L.
(maximum
overall length) of
3.9” (100mm).
Purchase a 4W
incandescent
night light bulb.
Insert bulbs into
their sockets.
Replace lens.
3.9" (100mm) M.O.L.