User's Manual

Page9
Pin input voltage
The input voltage measurement on a pin of the device is described in (b).
(a) (b)
2.4.3 Communication interfaces
– Up to two I
2
C interfaces; one supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink,
SMBus/PMBus, and wakeup from STOP
– Up to two USARTs supporting master synchronous SPI and modem control; one with ISO7816
interface, LIN, IrDA capability, auto baud rate detection and wakeup feature
– Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frame, 1 with I2S interface multiplexed
– HDMI CEC interface, wakeup on header reception
2.5 The operational use conditions
2.5.1 Install
-31921161
6
).
-#5 PIN
-31921061
C = 50 pF
-#5 PIN