Use and Care Manual

ManualsBrandsBroan-NuTone ManualsKitchenSensonic Speaker Kit with Bluetooth Wireless Technology for QT Fans

MODEL SPKACC

Page 1

APPLICATION

The SPKACC is a Hi-Fidelity, Bluetooth

wireless technology

enabled accessory that works with all QT-series Broan and

NuTone bath fans except: fans with humidity sensing, fans

equipped with heaters, and fans controlled with variable speed

controls.

The SPKACC can be used only with the models shown in this

chart:

ACCESSORY SPEAKER

READ AND SAVE THESE INSTRUCTIONS

Determine which MOTOR BRACKET is used in your fan.

“FLAT”

MOTOR BRACKET

“RAISED”

MOTOR BRACKET

The Bluetooth

word mark and logos are registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by Broan-NuTone LLC is under license. Other

trademark and trade names are those of their respective owners.

NOTE: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules and RSS-210 of Canada. Operation

is subject to the following two conditions:

(1) This device may not cause interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. FCC

ID: 2ADLL-99528551 IC: 2143B-99528551

This Bluetooth

wireless technology enabled Speaker complies with FCC radiation

exposure limits set forth for an uncontrolled environment. End users must follow the

specific operating instructions for satisfying exposure compliance. This speaker must

not be co-located or operate in conjunction with any other antenna or transmitter.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Video instructions also available at www.nutone.com

BROAN

MODELS

NUTONE

MODELS

BROAN MODELS

CANADA

NUTONE MODELS

CANADA

QT110E QTN110E QTR090C QTN130EC

QT130E

QTN110LE QTR090LC QTRN090C

QT130LE

QTN130E

QTR090RC QTRN110C

QT140LE

QTN130LE QTR100C QTRN110LC

QT140E

QTN80E QTR110C QTRN130EC

QTR080 QTN80L QTR110LC QTREN070C

QTR080L QTREN080 QTR110RC QTREN070FLC

QTR110 QTREN080FLT QTRE050RF QTREN080C

QTR110L QTREN110 QTRE070C QTREN090C

QT110LE QTREN110FLT QTRE070FLC QTREN090FLC

QTR140 QTRN080 QTRE075C QTREN110C

QTR140L QTRN080L QTRE080C QTREN110FLC

QTRE080 QTRN110 QTRE080C2S QTXEN050C

QTRE080FLT QTRN110L QTRE090C QTXEN080C

QTRE080R QTN130LE1

QTRE090FLC QTXEN090C

QTRE110 QTXEN050 QTRE110C QTXEN110C

QTRE110FLT QTXEN080 QTRE110RC QTXEN150C

QTRE110FLFT QTXEN080FLT QTRE110RF

QTXE050 QTXEN110 QTRE110FLC

QTXE080 QTXEN110FLT QTXE050C

QTXE080FLT QTXEN150

QTXE080C

QTXE110 QTXEN150FLT

QTXE090C

QTXE110FLT QTREN080F QTXE110C

QTXE150

QTREN080FLFT QTXE150C

QTXE150FLT

QTREN110F FQTR110C

QTR050F QTREN110FLFT FQTRE050C

QTR080F QTRN050F FQTRE070C

QTR110F QTRN080F FQTRE080C

QTRE080F QTRN110F FQTRE110C

QTRE080FLFT QTXRN000HF FQTRE110MG

QTRE110F QTXRN000HL FQTXE050C

QT80E FQTXE110C

QT80L

QT90E

QT90L

SSQTXE080

SSQTXE110

* The SPKACC speaker

accessory WILL

ONLY FIT these

models if the models

were manufactured

before October 2015.

These models have

one of two styles of

metal motor bracket

shown in the SPKACC

installation manual.

The SPKACC speaker

accessory WILL NOT

FIT these models

if the models were

manufactured after

October 2015. These

models have the

motor surrounded by

a round, black plastic

housing/casing.

Summary of content (12 pages)

PAGE 1
MODEL SPKACC Page 1 ACCESSORY SPEAKER READ AND SAVE THESE INSTRUCTIONS Video instructions also available at www.nutone.com APPLICATION The SPKACC is a Hi-Fidelity, Bluetooth® wireless technology enabled accessory that works with all QT-series Broan and NuTone bath fans except: fans with humidity sensing, fans equipped with heaters, and fans controlled with variable speed controls.
PAGE 2
MODEL SPKACC Page 2 INSTALLATION WITH “RAISED” MOTOR BRACKET 1. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS: Switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. FAN PARTITION PLATE #8-32 X 5/8” SCREWS BRACKET OPENING LIGHT WIRE GRILLE SPRING GRILLE 2.
PAGE 3
MODEL SPKACC Page 3 INSTALLATION WITH “FLAT” MOTOR BRACKET 1. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS: Switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. LIGHT WIRE SPEAKER BRACKET #8-32 X 3/8” SCREWS GRILLE SPRING MOTOR BRACKET OPENING AUXILIARY BRACKET GRILLE 2.
PAGE 4
MODEL SPKACC Bluetooth® wireless technology SPEAKER OPERATION To connect to the Broan-NuTone Bluetooth® wireless technology Speaker for the first time: 1. To play your personal music or audio files, you need a Bluetooth wireless technology enabled Smart Phone, Tablet, or any other such device. 2. Set your device to a low-to-midrange volume before connecting to the speaker. 3.
PAGE 5
MODÈLE SPKACC HAUT-PARLEUR ACCESSOIRE Page 5 LIRE CES DIRECTIVES ET LES CONSERVER Vidéo d’instructions également disponible à www.nutone.com APPLICATION Le SPKACC est un accessoire de haute fidélité, compatible à la technologie sans fil Bluetooth® qui fonctionne avec tous les ventilateurs de salle de bain de série QT Broan et NuTone sauf : les ventilateurs à détecteur d’humidité, les ventilateurs munis de chaufferettes et les ventilateurs actionnés par une commande à vitesse variable.
PAGE 6
MODÈLE SPKACC Page 6 INSTALLATION AVEC SUPPORT DE MOTEUR « RELEVÉ » 1. AFIN DE DIMINUER LES RISQUES D’INCENDIE, D’ÉLECTROCUTION OU DE BLESSURES : Coupez l’alimentation du panneau électrique et verrouillez l’interrupteur principal afin d’empêcher que le courant ne soit rétabli accidentellement. S’il est impossible de verrouiller l’interrupteur principal, fixez solidement un message d’avertissement, par exemple une étiquette, sur le panneau électrique.
PAGE 7
MODÈLE SPKACC Page 7 INSTALLATION AVEC SUPPORT DE MOTEUR « À PLAT » 1. AFIN DE DIMINUER LES RISQUES D’INCENDIE, D’ÉLECTROCUTION OU DE BLESSURES : Coupez l’alimentation du panneau électrique et verrouillez l’interrupteur principal afin d’empêcher que le courant ne soit rétabli accidentellement. S’il est impossible de verrouiller l’interrupteur principal, fixez solidement un message d’avertissement, par exemple une étiquette, sur le panneau électrique.
PAGE 8
MODÈLE SPKACC Technologie sans fil Bluetooth® FONCTIONNEMENT DU HAUT-PARLEUR GARANTIE Pour vous connecter la première fois au haut-parleur Broan-NuTone à technologie sans fil Bluetooth ® : 1. Pour faire jouer votre musique personnelle ou vos fichiers audio, vous avez besoin d’un téléphone intelligent, d’une tablette ou d’un autre appareil compatible à la technologie sans fil Bluetooth. 2. Réglez votre appareil à un volume moyennement bas avant de vous connecter au haut-parleur. 3.
PAGE 9
MODELO SPKACC ALTAVOZ DE ACCESORIO Página 9 LEA Y CONSERVE ESTAS INSTRUCCIONES También encontrará instrucciones en video en www.nutone.com APLICACIÓN El SPKACC es un accesorio de alta fidelidad habilitado con tecnología inalámbrica Bluetooth® que funciona con todos los ventiladores para baño Broan y NuTone serie QT, excepto: ventiladores con detección de humedad, ventiladores equipados con calentadores y ventiladores accionados por controles de velocidad variable.
PAGE 10
MODELO SPKACC Página 10 INSTALACIÓN CON EL SOPORTE PARA MOTOR “ELEVADO” 1. PARA REDUCIR EL RIESGO DE INCENDIOS, DESCARGAS ELÉCTRICAS O LESIONES PERSONALES: Interrumpa el suministro eléctrico en el panel de servicio y bloquee los medios de desconexión del servicio para evitar que la electricidad se reanude accidentalmente. Cuando no sea posible bloquear los medios de desconexión del servicio, fije firmemente una señal de advertencia (como una etiqueta) en un lugar visible del panel de servicio.
PAGE 11
MODELO SPKACC Página 11 INSTALACIÓN CON EL SOPORTE PARA MOTOR “PLANO” 1. PARA REDUCIR EL RIESGO DE INCENDIOS, DESCARGAS ELÉCTRICAS O LESIONES PERSONALES: Interrumpa el suministro eléctrico en el panel de servicio y bloquee los medios de desconexión del servicio para evitar que la electricidad se reanude accidentalmente. Cuando no sea posible bloquear los medios de desconexión del servicio, fije firmemente una señal de advertencia (como una etiqueta) en un lugar visible del panel de servicio.
PAGE 12
MODELO SPKACC Tecnología inalámbrica Bluetooth® OPERACIÓN DEL ALTAVOZ Para conectar por primera vez el altavoz con tecnología inalámbrica Bluetooth ® de Broan-NuTone: 1. Para reproducir sus archivos personales de música o audio, necesita un teléfono inteligente, tableta o algún otro dispositivo similar habilitado con tecnología inalámbrica Bluetooth. 2. Antes de conectarlo al altavoz, configure su dispositivo con un volumen bajo a medio. 3.