Specification Sheet

SPECIFICATION SHEET
Broan-NuTone LLC, A Nortek Company, Hartford, Wisconsin 53027
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
REGISTER
HEATERS
FOR IN-WALL RECESSED MOUNTING
Don't give up beautiful woodwork for baseboard
heating — Use these space-saving, downflow
alternatives.
FEATURES:
GRILLE:
•
Sturdy, one-piece construction
•
20 gauge, with downflow louvers
•
White, baked enamel finish
•
Color-coordinated mounting screws
HEATER ASSEMBLY:
•
Nickel-chrome resistance alloy heating element
•
Mica insulated, zig-zag element configuration
•
120 VAC units can be converted to operate on 240 VAC
•
All models can be converted to operate at half-wattage
•
Manual reset thermal overload protector
•
Permanently lubricated motor
•
High-efficiency blower wheel
•
Removable from housing for cleaning or servicing
HOUSING:
•
24-gauge steel finished with black epoxy paint
•
Removable wiring cover - connect wiring away from tight
corners
•
Mounts directly to wall studs
•
Includes housing mask - to prevent construction damage
to roughed-in heater
Model 171H: Rough-in housing for use with finish assemblies
Model 120F, 124F, 128F: Finish assemblies for use with
171H rough-in housing
ACCESSORIES: (purchase separately)
•
Model 86W Line-Voltage Thermostat
•
Model 59V, 59W 60-Minute Timer
•
Model 61V, 61W 15-Minute Timer
10E 99042423C
TYPICAL SPECIFICATION
Heater shall be Broan Model 120, (120F), (124), (124F),
(128), (128F).
Unit shall have steel housing finished with black, epoxy paint.
It will be recessed mounted in the wall.
Heater to deliver 1000 watts (Models 120 and 120F), 1500
watts (Models 124 and 124F), 2000 watts (Models 128 and
128F) of fan-forced heat at safe "black" temperatures. It must
be convertible to operate at half-wattage, 120 VAC units must
be converted to operate at half-wattage. 120 VAC units must
be convertible to operate on 240 VAC. Heater shall include a
thermal overload protector with manual reset.
Grille will be White in color, of one-piece construction and will
have downflow louvers. Color-coordinated grille screws to be
provided.
Unit shall be controlled with a wall-mounted thermostat
(Model 86W - Line Voltage Thermostat), or timer (Model 59V,
59W - 60-Minute Timer), (Model 61V, 61W - 15-Minute
timer).
Heater shall be U.L. listed.