Spec Sheet

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Exhaust your cooktop without the use of an
overhead hood.
FEATURES
HOUSING:
• Rugged steel construction
• Black paint and/or galvanized finish
• Space-saving - can be used with most cooktops on the
market
• 30" or 36" size - Fits standard-size cabinets
• For indoor use only
BLOWER:
• Dynamically-balanced 9-1/8" dia. x 2-1/8" centrifugal blower
wheel for quiet, efficient performance
• Max. Blower CFM*: 600
• Permanently lubricated, thermally-protected motor
• Neoprene, resilient anti-vibration mounts
• Unit plugs directly into 120 VAC, 60 HZ, grounded outlet
• Uses standard 3-1/4" x 10" duct connector
• 3-position discharge - scroll box moveable to adjust to
floor joists
AIR VENT ASSEMBLY:
• Brushed stainless steel cover - just press button to turn
unit "ON"
• Designer White or Black doors - available separately
• Air vent rises to 7" from cooktop for optimum removal of
cooking contaminants
• Two washable aluminum grease filters
• Stainless steel face plate - makes cleanup quick and easy
• Flush-mounted, infinite speed blower control
• Conveniently located button - press to lower air vent and
turn unit "OFF"
TYPICAL SPECIFICATION
Downdraft blower system shall be Broan Model 2730 (Broan
Model 2736).
Unit to have steel housing with electrically coated acrylic paint
or galvanized finish. Air vent to rise at least 7" and have a
stainless steel face plate for ease of cleaning.
Filters to be washable and removable from above.
Blower will connect directly to 3-1/4" x 10" rectangular duct
(6" round duct using a transition). Blower discharge to be
convertible to accommodate ductwork from LEFT, RIGHT,
or BELOW and have 7-1/2" side-to-side adjustment.
Motor shall be mounted to blower assembly with grease
resistant anti-vibration mounts, be removable, and lifetime
lubricated.
Downdraft system shall operate on 120 VAC and be able to
be plugged into a standard grounded outlet. It will have an
infinite speed blower control.
Air delivery shall be no less than 500 CFM. Air delivery rating
shall be certified by HVI. Downdraft blower system to be
U.L. listed.
MODELS 2730 & 2736
ECLIPSE™
DOWNDRAFT
BLOWER SYSTEM
02K 99041819F
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures
prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1 in. static pressure,
based on tests conducted in a state-of-the-art test laboratory. Sones are a measure
of humanly-perceived loudness, based on laboratory measurements.
* Max. blower CFM indicates the performance of the hood blower in open air.
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 1-800-558-1711 www. Broan-NuTone.com
Venmar Ventilation ULC, 550 Lemire Blvd., Drummondville, QC, Canada J2C 7W9 1-877-896-1119 www.broan.ca
HVI PERFORMANCE
Duct Orientation Size
Sones CFM
Normal High Normal
High
0.25 in. w.g.
High
0.1 in. w.g.
Vertical - Rectangular 3¼ in. x 10 in
. 3.0 10.5 230 480 500