Dimensions Guide

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Exhaust your cooktop without the use of an
overhead hood.
FEATURES
HOUSING:
Rugged steel construction
Finished with black, electrically-bonded epoxy paint
Space-saving - can be used with most cooktops on the
market
30" or 36" size - Fits standard-size cabinets
BLOWER:
Dynamically-balanced 9-1/8" dia. x 2-1/8" centrifugal blower
wheel for quiet, efficient performance
Permanently lubricated, thermally-protected motor
Neoprene, resilient anti-vibration mounts
Unit plugs directly into 120 VAC, 60 HZ, grounded outlet
Uses standard 3-1/4" x 10" duct connector
3-position discharge - scroll box moveable to adjust to
floor joists
AIR VENT ASSEMBLY:
Brushed stainless steel cover - just press button o turn unit
"ON"
Designer White or Black doors - available separately
Air vent rises to 7" from cooktop for optimum removal of
cooking contaminants
Two washable aluminum grease filters
Stainless steel face plate - makes cleanup quick and easy
Flush-mounted, infinite speed blower control
Conveniently located button - press to lower air vent and
turn unit "OFF"
TYPICAL SPECIFICATION
Downdraft blower system shall be Broan Model 2730 (Broan
Model 2736).
Unit to have steel housing with electrically-bonded paint
finish. Air vent to rise at least 7" and have a stainless steel
face plate for ease of cleaning.
Filters to be washable and removable from above.
Blower will connect directly to 3-1/4" x 10" rectangular duct
(6" round duct using a transition). Blower discharge to be
convertible to accommodate ductwork from LEFT, RIGHT, or
BELOW and have 7-1/2" side-to-side adjustment.
Motor shall be mounted to blower assembly with grease
resistant anti-vibration mounts, be removable, and lifetime
lubricated.
Downdraft system shall operate on 120 VAC and be able to
be plugged into a standard grounded outlet. It will have an
infinite speed blower control.
Air delivery shall be no less than 500 CFM. Air delivery rating
shall be certified by HVI. Downdraft blower system to be U.L.
listed.
SPECIFICATIONS
VOLTS AMPS CFM DUCT
120 4.0 500 3-1/4" x 10"
MODELS 2730 & 2736
ECLIPSE
TM
DOWNDRAFT
BLOWER SYSTEM
HVI certified ratings comply with testing proce-
dures prescribed by the Home Ventilating Insti-
tute. Ratings are at 0.1 in. static pressure.
10C 99041819B
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-800-543-8687)

Summary of content (2 pages)