Use and Care Manual

ManualsBrandsBroan ManualsVentilation HoodDowndraft Range Hood (Stainless Steel)

MODELS 2830 & 2836 ECLIPSE

DOWNDRAFT BLOWER SYSTEM

READ AND SAVE THESE INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO

PERSONS, OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufacturer. If you have

questions, contact the manufacturer at the address or telephone number

in the warranty.

2. Before servicing or cleaning unit, switch power off at service panel and lock

the service disconnecting means to prevent power from being switched

on accidentally. When the service disconnecting means cannot be locked,

securely fasten a prominent warning device, such as a tag, to the service

panel.

3. Installation work and electrical wiring must be done by a qualified person(s)

in accordance with all applicable codes and standards, including fire-rated

construction codes and standards.

4. Sufficient air is needed for proper combustion and exhausting of gases

through the flue (chimney) of fuel burning equipment to prevent backdraft-

ing. Follow the heating equipment manufacturer’s guideline and safety

standards such as those published by the National Fire Protection Asso-

ciation (NFPA), and the American Society for Heating, Refrigeration and

Air Conditioning Engineers (ASHRAE), and the local code authorities.

5. When cutting or drilling into wall or ceiling, do not damage electrical wiring

and other hidden utilities.

6. Do not use this range hood with an additional speed control device.

7. Ducted fans must always be vented to the outdoors.

8. To reduce the risk of fire, use only metal

duct

work.

9. Do not install this product with the activating switch directly behind a burner

or element. Minimum distance between the switch and the edge of the

burner should be 4 inches.

10. Loose-fitting or hanging clothing should never be worn when operating

this appliance. They may be ignited by burners/elements on cooktop.

11. Children should not be left alone or unattended in the area where this

appliance is in use.

12. This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1. Never leave surface units unattended at high settings. Boilovers cause

smoking and greasy spillovers that may ignite. Heat oils slowly on low or

medium settings.

2. Always turn hood ON when cooking at high heat or when cooking flaming

foods.

3. Clean ventilating fans frequently. Grease should not be allowed to

accumulate on fan or filter.

4. Use proper pan size. Always use cookware appropriate for the size of the

surface element.

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A

RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING

1. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray,

then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the

flames do not go out immediately, EVACUATE AND CALL THE FIRE

DEPARTMENT.

2. NEVER PICK UP A FLAMING PAN - Yo u may be burned.

3. DO NOT USE WATER, including wet dishcloths or towels - a violent

steam explosion

will result.

WARNING

4. Use an extinguisher ONLY if:

A. You know you have a Class ABC extinguisher, and you already

know how to operate it.

B. The fire is small and contained in the area where it

started.

C. The fire department is being called.

D. You can fight the fire with your back to an exit.

Based on “Kitchen Firesafety Tips” published by NFPA.

CAUTION

1. Fo r indoor use only.

2. For general ventilating use only. Do not use to exhaust hazardous or

explosive materials and vapors.

3. To avoid motor bearing damage and noisy and/or unbalanced impel-

lers, keep drywall spray, construction dust, etc. off power unit.

4. Clean filters and grease-laden surfaces frequently.

5. Do not repair or replace any part of this appliance unless specifically

recommended in this manual. All other servicing should be done by a

qualified technician.

6. Please read specification label on product for further information and

requirements.

7. To reduce the risk of fire and electric shock, install the downdraft only

with Broan Exterior Blower Models 331H or 332H or Broan In-Line

Blower Models HLB3, HLB6, HLB9, or HLB111. Other blowers cannot

be substituted. (Blowers sold separately.)

INSTALLER: Save this manual for Electrical Inspector and Homeowner to use.

HOMEOWNER: Use and Care Information on Pages 4 & 5.

INTENDED FOR DOMESTIC COOKING ONLY

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical

short-circuit, grounding reduces the risk of the electric shock by

providing an escape wire for the electric current. This appliance

is equipped with a cord having a grounding wire with a grounding

plug. The plug must be plugged into an outlet that is properly

installed and grounded.

WARNING – Improper grounding can result in a risk of electric

shock.

Consult a qualified electrician if the grounding instructions are

not completely understood, or if doubt exists as to whether the

appliance is properly grounded.

Do not use an extension cord. If the power supply cord is too short,

have a qualified electrician install an outlet near the appliance.

Summary of content (24 pages)

PAGE 1
MODELS 2830 & 2836 ECLIPSE DOWNDRAFT BLOWER SYSTEM READ AND SAVE THESE INSTRUCTIONS ! INTENDED FOR DOMESTIC COOKING ONLY ! WARNING WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: 1. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number in the warranty. 2.
PAGE 2
PLANNING - (continued) PLAN THE DUCTWORK This downdraft Note: The high blower level of system air flow is of this appliance may affect the TYPICAL INSTALLATION designed to be used to exhaust CHIMNEYTOP gas flame on some types of gas cooktops. and COUNTER This is NORMAL COOKTOP airborne contaminants when TOP by will cause no harm, but cancookbe corrected lowering the speed ingthe with a variety of gas or electric of blower. AIR cooktops.
PAGE 3
CUT COUNTERTOP OPENING INSTALL DUCTWORK & BLOWER 1. Lay out and cut the cooktop cut-out far enough FORWARD so downdraft will fit behind it. CAUTION - BEFORE CUTTING HOLE IN CABINET FOR DUCTWORK: Check for interference with floor joists, wall studs, electrical wiring or plumbing. 2. Set cooktop in place and slide it as far forward as possible. Center and square it with edges of countertop. OUTLET ASSEMBLY COLLAR TRANSITION ELBOW 3.
PAGE 4
WIRING DIAGRAM 3. Remove switch cover from right end of air vent. 4. Loosen the 2 screws holding the switch bracket in place. Position switch bracket so that activating switch just comes in contact with underside of switch membrane. Tighten screws. BLK WHT GRN 120 VAC LINE IN GEAR MOTOR YEL WHT BLK 5. Replace switch cover, gently lower air vent into chimney, and plug in power cord. Re-connect electrical power and check operation. SWITCH N.C.
PAGE 5
USE AND CARE - (Continued) SERVICING CLEANING WARNING:Always disconnect electric power supply before servicing unit. WARNING:Always disconnect electric power supply before cleaning unit. It may be necessary to remove the outlet assembly from the cabinet in order to service components such as the blower motor or air vent mechanism. Use a mild detergent suitable for painted surfaces. DO NOT USE ABRASIVE CLOTH, STEEL WOOL PADS, OR SCOURING POWDERS. Disconnect power to the cooktop and remove it first.
PAGE 6
SERVICE PARTS Models 2830 & 2836 Downdraft Blower Systems KEY NO.
PAGE 7
SERVICE PARTS Models 2830 & 2836 Downdraft Blower Systems 24 5 26 1 23 71 4 74 30 18 33 49 50 1 49 66 61 76 3 56 64 84 49 46 57 53 55 75 28 29 82 70 54 22 49 7 11 15 62 19 16 17 10 68 60 64 51 51 12 45 71 67 58 8 25 47 52 51 50
PAGE 8
WARRANTY BROAN-NUTONE ONE YEAR LIMITED WARRANTY Broan-NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
PAGE 9
SYSTÈME DE VENTILATEUR À TIRAGE VERS LE BAS ECLIPSE, MODÈLES 2830 ET 2836 VEUILLEZ LIRE ET CONSERVER CES INSTRUCTIONS ! CONÇUE POUR LES CUISINES DOMESTIQUES UNIQUEMENT ! AVERTISSEMENT AVERTISSEMENT POUR RÉDUIRE LES RISQUES D’INCENDIE, D’ÉLECTROCUTION OU DE BLESSURES PHYSIQUES, RESPECTEZ LES INSTRUCTIONS CIDESSOUS : 1. Utilisez cet appareil uniquement de la manière prévue par le fabricant. Si vous avez des questions, contactez le fabricant à l’adresse ou au numéro de téléphone indiqués dans la garantie.
PAGE 10
PRÉPARATION - (suite) PLANIFICATION DES CONDUITS DÉCOUPAGE DU COMPTOIR Ce système :de tiragede cet appareil peut affecter la Remarque Leventilateur débit d’airàélevé INSTALLATION TYPIQUE vers le bas conçu pour évacuer flamme de est certaines surfaces de cuisson au gaz.DECetDESSUS effet est DE les contaminants de l’air lors de COMPTOIRSURFACE CHEMINÉE CUISSON NORMAL et inoffensif, mais il peut être corrigé en réduisant la l’utilisation d’une surface de cuisson CONDUIT vitesse du ventilateur.
PAGE 11
PLANIFICATION DES DÉCOUPAGE CONDUITS DU COMPTOIR INSTALLATION DES CONDUITS ET VENTILATEUR 1. Tracez et découpez la forme de la table de cuisson suffisamment vers l’AVANT afin de pouvoir insérer l'appareil derrière elle. ATTENTION - AVANT DE DÉCOUPER LETROU DANS L’ARMOIRE POUR LE CONDUIT : Vérifiez toute interférence avec les solives du plancher, les montants des murs, les câbles électriques ou la plomberie. 2. Insérez la table de cuisson et glissez-la aussi loin vers l’avant que possible.
PAGE 12
DIAGRAMME DE CÂBLAGE 3. Retirez le couvercle du commutateur du côté droit du conduit d’aération. 4. Desserrez les 2 vis retenant le support du commutateur en place. Placez le support du commutateur pour que le commutateur de déclenchement soit en contact avec le dessous de la membrane du commutateur. Resserrez les vis. VERT NOIR BLANC 120 VCA ENTRÉE DE LIGNE MOTEUR À ENGRENAGES JAUNE NOIR 5.
PAGE 13
UTILISATION ET ENTRETIEN - ENTRETIEN (suite) AVERTISSEMENT : Coupez toujours le courant avant tout entretien de l’appareil. NETTOYAGE AVERTISSEMENT : Coupez toujours le courant avant de nettoyer l’appareil. Il faudra peut-être retirer le système d’assemblage de sortie de l’armoire pour faire l’entretien et la réparation de certains composants comme le moteur du ventilateur ou le mécanisme de conduit d’aération. Utilisez un détergent doux convenant aux surfaces peintes.
PAGE 14
PIÈCES DE RECHANGE Modèles 2830 et 2836 Systèmes de ventilateur à tirage vers le bas N° DE RÉFÉRENCE NUMÉRO DE PIÈCE 1 3 4 5 8 10 11 12 16 17 18 19 93400038 99400024 99470016 97011927 99360165 97009972 97011293 97010997 98007642 98007780 98010813 97018523 97018524 22 23 24 25 26 28 29 30 33 45 46 47 49 50 51 52 53 54 55 56 57 58 60 61 62 64 66 67 68 70 71 74 75 76 82 84 98008175 99710032 97011259 97011260 97011322 97011323 97010999 97011443 97010998 97011000 97009786 97009787 99090939 99080590 99110850
PAGE 15
PIÈCES DE RECHANGE Modèles 2830 et 2836 Systèmes de ventilateur à tirage vers le bas 24 5 26 1 23 71 4 74 30 18 33 49 50 1 49 66 61 76 3 56 64 84 49 46 57 53 55 75 28 29 82 70 54 22 49 15 11 15 62 19 16 17 10 68 60 64 51 51 12 45 71 67 58 8 25 47 52 51 50
PAGE 16
GARANTIE Broan-NuTone garantit à l’acheteur original que les produits vendus en vertu de la présente sont libres de tout vice de matériau ou de fabrication pour une période de un an à compter de la date d’achat originale. CETTE GARANTIE NE COMPORTE AUCUNE AUTRE GARANTIE, EXPRESSE OU TACITE, Y COMPRIS, MAIS SANS S’Y LIMITER, LES GARANTIES TACITES DE VALEUR MARCHANDE OU D’ADAPTATION À UN USAGE PARTICULIER.
PAGE 17
SISTEMA DE VENTILACIÓN DE TIRO DESCENDENTE ECLIPSE MODELOS 2830 Y 2836 LEA Y CONSERVE ESTAS INSTRUCCIONES ! PARA COCINAS DOMÉSTICAS SOLAMENTE ! ADVERTENCIA ADVERTENCIA PARA REDUCIR EL RIESGO DE INCENDIOS, DESCARGAS ELÉCTRICAS O LESIONES PERSONALES, RESPETE LO SIGUIENTE: 1. Utilice esta unidad sólo de la manera prevista por el fabricante. Si tiene dudas, comuníquese con el fabricante a la dirección o el número de teléfono que aparece en la garantía. 2.
PAGE 18
DISPOSICIÓN - (continuación) PLANIFICACIÓN DEL ENTUBADO Este sistema ventilación de-de este INSTALACIÓN TÍPICAafectar Nota: el altode nivel de flujode detiro aire artefacto puede scendente está diseñado para eliminar CAPERUZA DE PLACA la llama de gas en algunas clases de placas de cocina. Esto es los contaminantes suspendidos en el MESADA DE COCINA LA CHIMENEA NORMAL y no causará daño alguno, pero se puede corregir aire que se generan al cocinar con RESPImediante la reducción velocidad del soplador.
PAGE 19
CORTE LA ABERTURA DE LA MESADA INSTALACIÓN DEL ENTUBADO Y EL SOPLADOR 1. Coloque y corte la placa de cocina lo más hacia ADELANTE posible para que sistema de tiro descendente quepa detrás de ella. PRECAUCIÓN: ANTES DE CORTAR ORIFICIOS EN EL ARMARIO PARA LOS ENTUBADOS: Verifique la presencia de interferencia con las viguetas del piso, los puntales de la pared, el cableado eléctrico o los accesorios de fontanería. CONJUNTO DE TOMACORRIENTE COLLARÍN ADAPTADOR CODO 2.
PAGE 20
DIAGRAMA DE CABLEADO 3. Quite la tapa del interruptor del extremo derecho del respiradero. 4. Afloje los 2 tornillos que sostienen el soporte del interruptor en su lugar. Coloque el soporte del interruptor de activación de manera de que haga contacto con la parte interna de la membrana. Ajuste los tornillos. VERDE NEGRO BLANCO LÍNEA DE ENTRADA DE 120 VAC MOTORREDUCTOR AMARILLO NEGRO NEGRO VERDE VERDE BLANCO 5.
PAGE 21
USO Y MANTENIMIENTO (Continuación) MANTENIMIENTO LIMPIEZA ADVERTENCIA: Siempre desconecte el suministro de energía eléctrica antes de realizar el mantenimiento a la unidad. ADVERTENCIA: Siempre desconecte el suministro de energía eléctrica antes de limpiar la unidad. Quizás sea necesario extraer el tomacorriente del armario para realizar el mantenimiento de componentes tales como el motor del soplador o el mecanismo del respiradero. Utilice un detergente suave adecuado para las superficies pintadas.
PAGE 22
PIEZAS DE REPUESTO Modelos 2830 y 2836 Sistema de ventilación de tiro descendente N.
PAGE 23
PIEZAS DE REPUESTO Modelos 2830 y 2836 Sistema de ventilación de tiro descendente 24 5 26 1 23 71 4 74 30 18 33 49 50 1 49 66 61 76 3 56 64 84 49 46 57 53 55 75 28 29 82 70 54 22 49 23 11 15 62 19 16 17 10 68 60 64 51 51 12 45 71 67 58 8 25 47 52 51 50
PAGE 24
GARANTÍA Broan-NuTone garantiza al consumidor comprador original de sus productos que dichos productos carecerán de defectos en materiales o en mano de obra por un período de un año a partir de la fecha original de compra. NO EXISTEN OTRAS GARANTÍAS, EXPLICITAS O IMPLÍCITAS, INCLUYENDO, ENTRE OTRAS, GARANTÍAS IMPLÍCITAS DE COMERCIALIZACIÓN O APTITUD PARA UN PROPÓSITO PARTICULAR.