Replacement Parts List

PARTS NOT LISTED NO LONGER AVAILABLE 33
QT Fans
97016568 Ballast With Plugs for Fluorescent Bulb
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 Damper/Duct Connector - 6"
* Includes 2 Springs for Attaching Grille, Lens, Both Light
Sockets, and White Metal Light Reflector
** Includes Motor, Wheel, Motor Mounting Bracket/Plate,
Rubber Isolators, Washers, Nuts
QTXEN110FLT
NuTone Fan/Fluorescent
Light/Night Light
99271381 18 Watt Fluorescent Bulb -
QTXEN110FLT-C 18W GU24 Base 2 Req.
99271358 42 Watt Fluorescent Bulb -
QTXEN110FLT-A, B - 4 Pin (1- Req.)
99111400 Lens- Lgt. Bulb Cvr. QTXEN110FLT-C -
(4-11/16" X 9-15/16")
99111287 Lens- Lgt. Bulb Cvr. QTXEN110FLT-A,B-
(6" Round Diameter and 1" High)
97018272 Complete Grille Assy. with 18 W GU24 -
Sockets * Important See Notes Below
99140199 Grille Spring 2- Required
97017863 Blower Wheel QTXEN110FLT-B,C
99020284 Blower Wheel QTXEN110FLT-A ****
97017999 Motor and Wheel - QTXEN110FLT-B,C
99080580 Motor QTXEN110FLT-A
97017851 Complete Blower Assembly -
QTXEN110FLT-A,B,C **
n.l.a Mtr. Bracket/Plate QTXEN110FLT-B,C -
Must Order Complete Motor Assembly
97016468 Motor Bracket/Plate QTXEN110FLT-A
99100491 Rubber Motor Isolator, 4-Required -
QTXEN110FLT-A
99250959 Washers #8 x .625 4-Required -
QTXEN110FLT-A
99260558 Nut #8-32 For Attaching Motor, -
4-Required QTXEN110FLT-A
99420665 Thumbscrew for Holding Complete -
Blower Assembly In Place 1- Required
97018011 Wire Panel Cvr. and Wire Harness Assy.
98010102 Electrical Knockout Plate f/ Top of Hsg.
97016864 Ballast With Plugs for Fluorescent Bulb
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit ***
97016450 Damper/Duct Connector - 6"
* Includes 2 Springs for Attaching Grille, Lens, Light Sockets,
and White Metal Light Reflector. On 4-1-10 the grille design
changed as well as the type of bulbs. We changed from 1-
Large 42W 4 pin bulb to two 18W GU24 Base Bulbs. These
new bulbs are included with the new replacement grille and
instruction sheet to show how to remove the old ballast that
they will not need as well as installing the new grille. The Older
Style Grilles are No Longer Available.
** Includes 72MM Motor, Wheel 97017863, Motor Mounting
Bracket/Plate, Nuts
**** If Blower Assembly has been replaced at some
time with the 72MM motor the correct wheel to order is
97017863
Changed to 72MM Motor 11-2008
QTXEN110S
NuTone Humidity Sensing Fan
97016964 Grille Assembly *
99140199 Grille Spring 2 - Required
97017083 Humidity Control Assembly and -
Motor Plate QTXEN110S-A
99271344 Sensor Wire from Grille Sensor to-
Humidity Control Assembly
97017863 Wheel QTXEN110S-B
99020284 Wheel QTXEN110S-A ****
97017999 Motor/Wheel QTXEN110S-B **
99080580 Motor QTXEN110S-A
97017087 Motor Assembly QTXEN110S-A,B ***
99260558 Motor Nuts 4- Required QTXEN110S-A
99100491 Motor Rubber Isolators, -
4 Required QTXEN110S-A
99250959 Mtr. Washer #8 (4 Req.) QTXEN110S-A
99420665 Thumbscrew for Holding Complete -
Blower Assembly In Place 1- Required
97017085 Wire Panel/Harness Assy. Inside Hsg.
98010102 Wiring Plate - Outside of Hsg. w/ K.O.’s
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 Damper/Duct Connector - 6"
* Grille Assembly - Includes Grille, Sensor and Wire Harness
and 2 Springs
** Includes 72MM Motor, Wheel 97017863,
*** Motor Assembly - Includes Blower Wheel, 72MM Motor,
Motor Plate, Hex Lock Nuts, and Humidity Control Assem-
bly
**** If Blower Assembly has been replaced at some
time with the 72MM motor the correct wheel to order is
97017863
Chg. to "B" Revision with 72MM Motor 11-11-2008
QTXEN110SFLT
NuTone Humidity Sensing Fan and
42 Watt Fluorescent Light/Night -
Light
99271358 Fluorescent Bulb - 42Watt - 4 Pin
97016864 Ballast Assembly for Fluorescent Bulb -
QTXEN110SFLT-A,B
99111345 Light lens
97016967 Grille and Assembly- Includes Lens and
2 Grille Springs *
99140199 Grille Springs 2 -Required
97017084 Humidity Control and Motor Plate -
QTXEN110SFLT-A,B
99271344 Sensor Wire Harness from -
Grille Sensor to Humidity Control Assy.
97017863 Wheel QTXEN110SFLT-B
99020284 Wheel QTXEN110SFLT-A
97017088 Motor Assy. QTXEN110SFLT-A,B ***
97017999 Motor/Wheel QTXEN110SL-B **
99080580 Motor QTXEN110SFLT-A
99260558 Motor Nuts 4-Req. QTXEN110SFLT-A
99100491 Motor Rubber Isolators, -
4 Required QTXEN110SFLT-A
99250959
Mtr. Washer #8 (4 Req.) QTXEN110SFLT-A
99420665 Thumbscrew for Holding Complete -
Blower Assembly In Place 1- Required
97017086 Wire Panel/Harness Assembly -
Inside Housing 82508
98010102 Wiring Plate - Outside of Hsg. w/ K.O.’s
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 Damper/Duct Connector - 6"
* Includes 2 Springs for Attaching Grille, Lens, Both Light
Sockets, and White Metal Light Reflector, Sensor and Wire
Harness
** Motor 72MM and Wheel S97017863 Wheel
*** Motor Assy. - Includes Blower Wheel, 72MM Motor, Motor
Plate, Hex Lock Nuts, and Humidity Control Assy. -
**** If Blower Assembly has been replaced at some
time with the 72MM motor the correct wheel to order is
97017863
Chg. to "B" Revision with 72MM Motor 11-11-2008
QTXEN150
NuTone Fan
97017622 Grille Assy. QTXEN150-B (11-28-07) *
97016460 Grille Assembly QTXEN150-A -
(3-17-04 to 11-28-07) *
99140199 Grille Spring 2- Required
99020284 Blower Wheel QTXEN150-A,B
99080565 Motor QTXEN150-A,B
97016591 Complete Blower Assembly**
97016468 Motor Bracket/Plate
99100491 Rubber Motor Isolator, 4-Required
99250959 Washers #8 x .625 4-Required
99260558 Nut #8-32 f/ Attaching Motor, 4-Req.
99420665 Thumbscrew for Holding Complete -
Blower Assembly In Place 1- Required
97018010 Wire Panel Cvr. and Wire Harness Assy.
98010102 Electrical Knockout Plate f/ Top of Hsg.
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 Damper/Duct Connector - 6"
* Includes 2 Springs for Attaching Grille
** Includes Motor, Wheel, Motor Mounting Bracket/Plate,
Rubber Isolators, Washers, Nuts
Chg. to "B" Revision with New Grille 11-28-2008
QTXEN150FL
NuTone Fan/Fluorescent Light/Night Light
(Discontinued 8-2007)
99271311 26Watt Fluorescent Bulb - 2 Pin
99111287 Lens - Light Bulb Cover,
97016545 Complete Grille Assembly*
99140199 Grille Spring 2- Required
99020284 Blower Wheel
99080565 Motor
97016591 Complete Blower Assembly**
97016468 Motor Bracket/Plate
99100491 Rubber Motor Isolator, 4-Required
99250959 Washers #8 x .625 4-Required
99260558 Nut #8-32 f/ Attaching Motor, 4-Req.
97016585 Wire Panel Cvr. and Wire Harness Assy.
98010102 Electrical Knockout Plate f/ Top of Hsg.
97016568 Ballast With Plugs for Fluorescent Bulb
99500397 Insulation
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 Damper/Duct Connector - 6"
* Includes 2 Springs for Attaching Grille, Lens, Both Light
Sockets, and White Metal Light Reflector
** Includes Motor, Wheel, Motor Mounting Bracket/Plate,
Rubber Isolators, Washers, Nuts