Replacement Parts List

PARTS NOT LISTED NO LONGER AVAILABLE 39
QT Fans
99080580 Motor QTRE110F-A
97017854 Complete Blwr. Assy. QTRE110F-B ****
97016738 Complete Blwr. Assy. QTRE110F-A **
97016468 Motor Bracket/Plate
99100491 Rubber Motor Isolator, 4-Required
99250959 Washers #8 c .625 4-Required
99260558 Nut #8-32 f/ Attaching Motor 4 Req.
97018010 Wire Panel Cover and Wire Harness -
Assembly ***
98010102 Electrical K.O. Plate f/ Top of Hsg.***
97018014 I-Joist Spacer Block (Contains 2 ) ***
SQTHB1 Hanger Bar Kit ***
97016449 Damper/Duct Connector - 4" ***
* Includes 2 Springs for Attaching Grille
** Includes Motor, Wheel, Motor Mounting Bracket/Plate,
Rubber Isolators, Washers, Nuts
*** Not Included with finish pack
**** Includes 72MM Motor, Wheel 97017863, Motor Mount-
ing Bracket/Plate, and Nuts
**** If Blower Assembly has been replaced at some time
with the 72MM motor assembly the correct wheel to order is
97017863
Changed to "B" Rev. and 72MM Motor 11-11-2008
QTRE110FL
Bath Fan/Light
(Discontinued August 2007)
99271311 26 Watt Fluorescent Bulb - 2 Pin
99111281 Lens - Light Bulb Cover
97016548 Complete Grille Assembly*
99140199 Grille Spring 2-Required
99020284 Blower Wheel
99080580 Motor
97016738 Complete Blower Assembly**
97016468 Motor Bracket/Plate
99100491 Rubber Motor Isolator, 4-Required
99250959 Washers #8 x .625 4-Required
99260558 Nut #8-32 f/ Attaching Motor 4 Req.
97016585 Wire Panel Cover and Wire Harness -
Assembly
98010102 Electrical Knockout Plate f/ Top of Hsg.
97016568 Ballast With Plugs for Fluorescent Bulb
97016449 Damper/Duct Connector - 4"
* Includes 2 Springs for Attaching Grille, Lens, Both Light
Sockets, and White Metal Light Reflector
** Includes Motor, Wheel, Motor Mounting Bracket/Plate,
Rubber Isolators, Washers, Nuts
QTRE110FLF
Fan/ 26Watt Fluorescent Light and Night
Light Finish Pack
(Discontinued 8/2007)
99271311 26Watt Fluorescent Bulb - 2 Pin
99111281 Lens - Light Bulb Cover
97016548 Complete Grille Assembly*
99140199 Grille Spring 2-Required
99020284 Blower Wheel
99080580 Motor
97016738 Complete Blower Assembly**
97016468 Motor Bracket/Plate
99100491 Rubber Motor Isolator, 4-Required
99250959 Washers #8 x .625 4-Required
99260558 Nut #8-32 f/ Attaching Motor 4 Req.
97016585 Wire Panel Cover and Wire Harness -
Assembly ***
98010102 Electrical K.O. Plate f/ Top of Hsg. ***
97016568 Ballast With Plugs for Fluorescent Bulb
97018014 I-Joist Spacer Block (Contains 2 ) ***
SQTHB1 Hanger Bar Kit ***
97016449 Damper/Duct Connector - 4" ***
* Includes 2 Springs for Attaching Grille, Lens, Both Light
Sockets, and White Metal Light Reflector
** Includes Motor, Wheel, Motor Mounting Bracket/Plate,
Rubber Isolators, Washers, Nuts
*** Not included with finish pack
QTRE110FLFT
Fan/ Fluorescent Light and Night Light
Finish Pack
99271381 18 Watt Fluorescent Bulb -
QTRE110FLFT-C 18W GU24 Base 2 Req.
99271358 42 Watt Fluorescent Bulb -
QTRE110FLFT-A, B - 4 Pin (1- Required)
99111401 Lens- Lgt. Bulb Cover QTRE110FLFT-C -
(5-11/32" X 10-9/32")
99111281 Lens- Lgt. Bulb Cvr. QTRE110FLFT-A,B -
(5-11/32" X 10-5/16")
97018273 Complete Grille Assy. with 2-18W -
Sockets* Important See Notes Below
99140199 Grille Spring 2-Required
97017863 Blower Wheel QTRE110FLFT-B,C
99020284 Blower Wheel QTRE110FLFT-A *****
n.l.a. Motor - Must Order Complete -
Blower Assembly 97017856
99080580 Motor QTRE110FLFT-A
97017856 Complete Blower Assembly -
QTRE110FLFT-B,C ****
97016906 Complete Blower Assembly -
QTRE110FLFT-A **
97016901 Motor Bracket/Plate QTRE110FLFT-A
99100491 Rubber Motor Isolator -
4-Required QTRE110FLFT-A
99250959 Washers #8 x .625 4-Required -
QTRE110FLFT-A
99260558 Nut #8-32 for Attaching Motor -
4-Required QTRE110FLFT-A
99420665 Thumbscrew for Holding Complete -
Blower Assembly In Place 1- Req.***
97018011 Wire Panel Cover and Wire Harness -
Assembly ***
98010102 Electrical K.O. Plate f/ Top of Hsg.***
97016864 Ballast With Plugs f/ Fluorescent Bulb -
QTRE110FLFT-A,B
97018014 I-Joist Spacer Block (2 Supplied) ***
SQTHB1 Hanger Bar Kit ***
97016449 Damper/Duct Connector - 4" ***
* Includes 2 Springs for Attaching Grille, Lens, Light Sockets,
and White Metal Light Reflector. On 4-1-10 the grille design
changed as well as the type of bulbs. We changed from 1-
Large 42W 4 pin bulb to two 18W GU24 Base Bulbs. These
new bulbs are included with the new replacement grille and
instruction sheet to show how to remove the old ballast that
they will not need as well as installing the new grille. The Older
Style Grilles are No Longer Available.
** Includes Motor, Wheel, Motor Mounting Bracket/Plate,
Rubber Isolators, Washers, Nuts
*** Not included with finish pack
**** Includes 72MM Motor, Wheel 97017863, Motor Mount-
ing Bracket/Plate, and Nuts
***** If Blower Assembly has been replaced at some time
with the 72MM motor assembly the correct wheel to order is
97017863
Changed to "B" Rev. and 72MM Motor 11-11-2008
QTREN110FLFT
NuTone Fan/ Fluorescent Light and
Night Light Finish Pack
99271381 18 Watt Fluorescent Bulb -
QTXEN110FLFT-C 18W GU24 Base 2 Req.
99271358 42 Watt Fluorescent Bulb -
QTXEN110FLFT-A, B - 4 Pin (1- Req.)
99111401 Lens- Lgt. Bulb Cvr. QTXEN110FLFT-C -
(5-11/32" X 10-9/32)
99111310 Lens - Light Bulb Cover -
QTXEN110FLFT-A,B (6-3/32" X 8-25/32)
97018274 Complete Grille Assy. with Sockets* -
Important See Notes Below
99140199 Grille Spring 2-Required
97017863 Blower Wheel QTREN110FLFT-B,C
99020284 Blower Wheel QTREN110FLFT-A *****
n.l.a. Motor QTREN110FLFT-B - Must Order-
Complete Blower Assembly, 97017856
99080580 Motor QTREN110FLFT-A
97017856 Complete Blower Assembly -
QTRE110FLFT-B,C ****
97016906 Complete Blower Assembly -
QTREN110FLFT-A **
97016901 Motor Bracket/Plate QTREN110FLFT-A
99100491 Rubber Motor Isolator -
4-Required QTREN110FLFT-A
99250959 Washers #8 x .625 4-Required -
QTREN110FLFT-A
99260558 Nut #8-32 for Attaching Motor -
4-Required QTREN110FLFT-A
99420665 Thumbscrew for Holding Complete -
Blower Assy. In Place 1- Required ***
97018011 Wire Panel Cover and Wire Harness -
Assembly ***
98010102 Electrical K.O. Plate f/ Top of Hsg.***
97016864 Ballast With Plugs for Fluorescent Bulb
QTREN110FLFT-A,B
97018014 I-Joist Spacer Block (2 Supplied) ***
SQTHB1 Hanger Bar Kit ***
97016449 Damper/Duct Connector - 4" ***
* Includes 2 Springs for Attaching Grille, Lens, Light Sockets,
and White Metal Light Reflector. On 4-1-10 the grille design
changed as well as the type of bulbs. We changed from 1-
Large 42W 4 pin bulb to two 18W GU24 Base Bulbs. These
new bulbs are included with the new replacement grille and
instruction sheet to show how to remove the old ballast that
they will not need as well as installing the new grille. The Older
Style Grilles are No Longer Available.
** Includes Motor, Wheel, Motor Mounting Bracket/Plate,
Rubber Isolators, Washers, Nuts
*** Not Included with finish pack
**** Includes 72MM Motor, Wheel 97017863, Motor Mount-
ing Bracket/Plate, and Nuts
***** If Blower Assembly has been replaced at some time
with the 72MM motor assembly the correct wheel to order is
97017863
Changed to "B" Rev. and 72MM Motor 11-11-2008