Replacement Parts List
PARTS NOT LISTED NO LONGER AVAILABLE 41
QT Fans
QTXE110FLT
Fan/Fluorescent Light and
Night Light
99271381 18 Watt Fluorescent Bulb -
QTXE110FLT-C 18W GU24 Base 2 Req.
99271358 42 Watt Fluorescent Bulb -
QTXE110FLT-A,B - 4 Pin (1- Required)
99111399 Lens- Lgt. Bulb Cover QTXE110FLT-C -
(6-13/16" X 7-1/8")
99111284 Lens- Lgt. Bulb Cvr. QTXE110FLT-A,B -
(5-3/4" X 8-1/2")
97018271 Complete Grille Assy. w/ 18 W GU24 -
Sockets* Important See Notes Below
99140199 Grille Spring 2- Required
97017863 Blower Wheel QTXE110FLT-B,C
99020284 Blower Wheel QTXE110FLT-A *****
97017999 Motor and Wheel QTXE110FLT-B,C
99080580 Motor QTXE110FLT-A
97017851
Complete Blwr. Assy. QTXE110FLT-B,C***
97016906 Complete Blwr. Assy. QTXE110FLT-A**
n.l.a Motor Bracket/Plate QTXE110FLT-C -
(Only Available With Complete Blower)
97016901 Motor Bracket/Plate QTXE110FLT-B
97016468 Motor Bracket/Plate QTXE110FLT-A
99100491 Rubber Motor Isolator -
4-Required QTXE110FLT-A
99250959 Washers #8 x .625 -
4-Required QTXE110FLT-A
99260558 Nut #8-32 for Attaching Motor -
4-Required QTXE110FLT-A
99420665 Thumbscrew for Holding Complete-
Blower Assy. In Place 1- Required***
97018011 Wire Panel Cover and Wire Harness -
Assembly
98010102 Electrical K.O. Plate for Top of Housing
97016864 Ballast With Plugs for Fluorescent Bulb
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 Damper/Duct Connector - 6"
* Includes 2 Springs for Attaching Grille, Lens, Light Sockets,
and White Metal Light Reflector. On 4-1-10 the grille design
changed as well as the type of bulbs. We changed from 1-
Large 42W 4 pin bulb to two 18W GU24 Base Bulbs. These
new bulbs are included with the new replacement grille and
instruction sheet to show how to remove the old ballast that
they will not need as well as installing the new grille. The Older
Style Grilles are No Longer Available.
** Includes Motor, Wheel, Motor Mounting Bracket/Plate,
Rubber Isolators, Washers, Nuts
*** Includes 72MM Motor, Wheel 97017863, Motor Mounting
Bracket/Plate, and Nuts
***** If Blower Assembly has been replaced at some time
with the 72MM motor assembly the correct wheel to order is
97017863
Rev. "B" Introduced the 72MM Motor 11-11-2008
QTXE110S
Humidity Sensing Fan
97016963 Grille Assembly 12-7/8" X 13-3/4" -
Includes Grille, 2 Springs, Sensor -
Wire Harness
99140199 Grille Spring 2 - Required
97017083 Humidity Control Assy. and Motor Plate
99271344 Sensor Wire Harness f/ Grille Sensor to -
Humidity Control
97017863 Wheel QTXE110S-B
99020284 Wheel QTXE110S-A ***
97017999 Motor and Wheel QTXE110S-B **
99080580 Motor QTXE110S-A
97017087 Motor Assembly QTXE110S-A,B*
99260558 Motor Nuts 4- Required QTXE110S-A
99100491 Motor Rubber Isolators -
4 Required QTXE110S-A
99250959 Motor Washer #8 (4 Req.) QTXE110S-A
99420665 Thumbscrew for Holding Complete -
Blower Assy. In Place 1- Required***
97017085 Wire Panel/Harness Assy. Inside Hsg.
98010102 Wiring Plate - Outside of Hsg. w/ K.O.’s
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 Damper/Duct Connector - 6"
* Includes Motor, Wheel, Motor Mounting Bracket/
Plate, Humidity Control, Rubber Isola-
tors, Washers, Nuts
** Includes 72MM Motor, Wheel 97017863,
*** If Blower Assembly has been replaced at some time with
the 72MM motor assembly the correct wheel to order is
97017863
Rev. "B" Introduced the 72MM Motor 11-11-2008
QTX110SL
Humidity Sensing Fan and Light
99111345 Light lens
97016965 Grille Assembly *
99140199 Grille Springs 2 -Required
97017083 Humidity Control w/ Mtr. Bracket/Plate
99271344 Sensor Wire Harness f/ Grille Sensor -
to Humidity Control Assembly
99020284 Wheel
97017087 Motor Assembly**
99080598 Motor
99260558 Motor Nuts 4- Required
99100491 Motor Rubber Isolators, 4 Required
99250959 Motor Washer #8 (4 Required)
99420665 Thumbscrew for Holding Complete -
Blower Assembly In Place 1- Required
97017086 Wire Panel/Harness Assy. Inside Hsg.
98010102 Wiring Plate - Outside of Hsg. w/ K.O.’s
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 Damper/Duct Connector - 6"
*Includes Grille, Lens, 2 Grille Springs, Both Sockets, Reflec-
tor, Sensor and Wire Harness.
** Includes Motor, Wheel, Humidity Control, Motor Mounting
Bracket/Plate, Rubber Isolators, Washers, Nuts
QTXN110SLT
NuTone Humidity Sensing Fan and
Light
99111345 Light Lens QTXN110SL-A
97016968 Grille Assembly QTXN110SL-A *
99140199 Grille Springs 2 -Required
97017083 Humidity Control with -
Motor Bracket/Plate QTXN110SL-A
99271344 Sensor Wire Harness f/ Grille Sensor -
to Humidity Control Assembly
99020284 Wheel QTXN110SL-A
97017452 Motor Assembly QTXN110SL-A**
99080598 Motor QTXN110SL-A
99260558 Motor Nuts 4- Required -
QTXN110SL-A
99100491 Motor Rubber Isolators -
4 Required QTXN110SL-A
99250959 Mtr. Washer #8 (4 Req.) QTXN110SL-A
99420665 Thumbscrew for Holding Complete -
Blower Assembly In Place 1- Required
97017086 Wire Panel/Harness Assy. Inside Hsg.
98010102 Wiring Plate - Outside of Hsg. w/ K.O.’s
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 6" Damper/Duct Connector
*Includes Grille, Lens, 2 Grille Springs, Both Sockets, Reflec-
tor, Sensor, and Wire Harness
** Includes Motor, Wheel, Humidity Control, Motor Mounting
Bracket/Plate, Rubber Isolators, Washers, Nuts
QTXE110SFLT
Humidity Sensing Fan and
42 Watt Fluorescent Light
99271358 42 Watt Fluorescent Bulb -
4 Pin QTXE110SFLT-A,B
97016864 Ballast Assembly for Fluorescent Bulb -
QTXE110SFLT-A,B
99111345 Light Lens QTXE110SFLT-A,B
97016966 Grille Assembly QTXE110SFLT-A,B *
99140199 Grille Springs 2-Required -
QTXE110SFLT-A,B
97017084 Humidity Control Assembly and Motor -
Plate QTXE110SFLT-A,B
99271344 Sensor Wire Harness f/ Grille Sensor -
to Humidity Control Assembly -
QTXE110SFLT-A,B
97017863 Wheel QTXE110SFLT-B
99020284 Wheel QTXE110SFLT-A ***
97017088 Motor Assembly With 72MM -
QTXE110SFLT-A,B **
99080580 Motor QTXE110SFLT-A
99260558 Motor Nuts 4- Req. QTXE110SFLT-A
99100491 Motor Rubber Isolators -
4 Required QTXE110SFLT-A
99250959 Motor Washer #8 (4 Required) -
QTXE110SFLT-A
99420665 Thumbscrew for Holding Complete -
Blower Assembly In Place 1- Required
97017086 Wire Panel/Harness Assy. Inside Hsg.
98010102 Wiring Plate - Outside of Hsg. w/ K.O.’s
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 Damper/Duct Connector - 6"
*Includes Grille, Lens, 2 Grille Springs, Both Sockets, Reflec-
tor and Sensor and Wire Harness
** Motor Assembly -Includes 72MM Motor, Wheel 97017863,
Motor Mounting Bracket/Plate, and Nuts and Humidity Con-
trol after 11-11-08.
*** If Blower Assembly has been replaced at some time with
the 72MM motor assembly the correct wheel to order is
97017863
Changed to "B" Rev. and 72MM Motor 11-11-2008