Replacement Parts List
PARTS NOT LISTED NO LONGER AVAILABLE 42
QT Fans
QTXE050
Bath Fan
97017621
Grille Assy. QTXE050-B,C After 11-2007*
99140199 Grille Spring 2- Required
97017863 Blower Wheel QTXE050-C
99020284 Blower Wheel QTXE050-A,B
97017842 Motor 72MM and Wheel QTXE050-C
n.l.a. Motor QTXE050-A,B Must Order -
97017782
97017782 Complete Blower Assembly W/ 72 MM -
Motor QTXE050-A,B,C**
97016468 Motor Bracket/Plate
99100491 Rubber Motor Isolator, 4-Required
99250959 Washers #8 x .625 4-Required
99260558 Nut #8-32 for Attaching Motor 4-Req.
99420665 Thumbscrew for Holding Complete -
Blower Assembly In Place 1- Required
97018010 Wire Panel Cover and Wire Harness -
Assembly
98010102 Electrical Knockout Plate f/ Top of Hsg.
97016450 Damper/Duct Connector - 6"
* Includes 2 Springs for Attaching Grille. Grille Design
Changed in Late Nov. 2007
** Motor Assembly -Includes 72MM Motor, Wheel 97017863,
Motor Mounting Bracket/Plate, and Nuts
Changed to "C" Rev. and 72MM Motor 10-17-2008
Rev. "B" Changed From 9701459 to the 97017621 Grille
QTXE150
Bath Fan
97017621 Grille Assembly QTXE150-A,B*
99140199 Grille Spring 2- Required
99020284 Blower Wheel QTXE150-A,B
99080565 Motor QTXE150-A,B
97016591 Complete Blower Assy. QTXE150-A,B**
97016468 Motor Bracket/Plate QTXE150-A,B
99100491 Rubber Motor Isolator -
4-Required QTXE150-A,B
99250959 Washers #8 x .625 -
4-Required QTXE150-A,B
99260558 Nut #8-32 for Attaching Motor -
4-Required QTXE150-A,B
99420665 Thumbscrew for Holding Complete -
Blower Assembly In Place 1- Required
97018010 Wire Panel Cover and Wire Harness -
Assembly
98010102 Electrical Knockout Plate f/ Top of Hsg.
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 Damper/Duct Connector - 6"
* Includes 2 Springs for Attaching Grille. Grille design
changed Nov. 2007
** Includes Motor, Wheel, Motor Mounting Bracket/Plate,
Rubber Isolators, Washers, Nuts
Rev. "B" Changed From 9701459 Grille to the 97017621 Grille
QTXE150FL
150 CFM Fluorescent Light and
Night Light (Disc. August 2007)
99271381 18 Watt Fluorescent Bulb -
18W GU24 Base ( 2 -Required)
99271311 26Watt Fluorescent Bulb - 2 Pin
99111284 Lens - Light Bulb Cover Used On Grille
With 1-26 Watt Bulb, (5-3/4" X 8-1/2")
99111399 Lens-Lgt. Bulb Cvr. Used On Grille With-
2 -18 Watt Bulbs (6-13/16" X 7-1/8")
97018271 Replaces Complete Grille Assembly -
QTXE150FL-A* -
Important See Notes Below
99140199 Grille Spring 2- Required
99020284 Blower Wheel QTXE150FL-A
99080565 Motor QTXE150FL-A
97016591 Complete Blwr. Assy. QTXE150FL-A**
97016468 Motor Bracket/Plate QTXE150FL-A
99100491 Rubber Motor Isolator -
4-Required - QTXE150FL-A
99250959 Washers #8 x .625 4-Required-
QTXE150FL-A
99260558 Nut #8-32 for Attaching Motor -
4-Required QTXE150FL-A
99420665 Thumbscrew for Holding Complete -
Blower Assembly In Place 1- Required
97016585 Wire Panel Cover and Wire Harness -
Assembly
98010102 Electrical Knockout Plate f/ Top of Hsg.
97016568 Ballast With Plugs for Fluorescent Bulb
99500397 Insulation
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 Damper/Duct Connector - 6"
* Includes 2 Springs for Attaching Grille, Lens, Both Light
Sockets, and White Metal Light Reflector
** Includes Motor, Wheel, Motor Mounting Bracket/Plate,
Rubber Isolators, Washers, Nuts
* Includes 2 Springs for Attaching Grille, Lens, Light Sockets,
and White Metal Light Reflector. On 4-1-10 the grille design
changed as well as the type of bulbs. We changed from 1-
Large 42W 4 pin bulb to two 18W GU24 Base Bulbs. These
new bulbs are included with the new replacement grille and
instruction sheet to show how to remove the old ballast that
they will not need as well as installing the new grille. The Older
Style Grilles are No Longer Available.
QTXE150FLT
Fan/Fluorescent Light and
Night Light
99271381 18 Watt Fluorescent Bulb -
QTXE150FLT-B 18W GU24 Base 2 Req.
99271358 42 Watt Fluorescent Bulb -
QTXE080FLT-A - 4 Pin (1- Required)
99111399 Lens - Light Bulb Cover -
QTXE150FLT-B (6-13/16" X 7-1/8")
99111284 Lens - Light Bulb Cover -
QTXE080FLT-A, (5-3/4" X 8-1/2")
97018271 Complete Grille Assembly with -
18 W GU24 Sockets* -
Important See Notes Below
99140199 Grille Spring 2- Required
99020284 Blower Wheel QTXE150FLT-A
99080565 Motor QTXE150FLT-A
97016591 Complete Blower Assembly -
QTXE150FLT-B **
97016926 Complete Blwr. Assy. QTXE150FLT-A**
Motor Bracket/Plate QTXE150FLT-B -
(Only Available With Complete Blower)
97016901 Motor Bracket/Plate QTXE150FLT-A
99100491 Rubber Motor Isolator -
4-Required QTXE150FLT-A
99250959 Washers #8 x .625 -
4-Required QTXE150FLT-A
99260558 Nut #8-32 for Attaching Motor -
4-Required QTXE150FLT-A
99420665 Thumbscrew for Holding Complete -
Blower Assembly In Place 1- Required
97018011 Wire Panel Cover and Wire Harness -
Assembly
98010102 Electrical Knockout Plate f/ Top of Hsg.
97016864 Ballast With Plugs for Fluorescent Bulb-
QTXE150FLT-A
99500397 Insulation
97018014 I-Joist Spacer Block (Contains 2 )
SQTHB1 Hanger Bar Kit
97016450 Damper/Duct Connector - 6"
* Includes 2 Springs for Attaching Grille, Lens, Light Sockets,
and White Metal Light Reflector. On 4-1-10 the grille design
changed as well as the type of bulbs. We changed from 1-
Large 42W 4 pin bulb to two 18W GU24 Base Bulbs. These
new bulbs are included with the new replacement grille and
instruction sheet to show how to remove the old ballast that
they will not need as well as installing the new grille. The Older
Style Grilles are No Longer Available.
** Includes Motor, Wheel, Motor Mounting Bracket/Plate,
Rubber Isolators, Washers, Nuts
QTXR000HF
Housing 4 - Pack Exhaust Fans
97016466 Housing
97018010 Wire Panel Cover and Wire Harness -
Assembly
98010102 Electrical Knockout Plate f/ Top of Hsg.
97018014 I-Joist Spacer Block (Contains 2 ) -
4-Required for 4-Pack
SQTHB1 Hanger Bar Kit
97016449 Damper/Duct Connector - 4"
QTXRN000HF
NuTone Housing
4- Pack Exhaust Fans
97016466 Housing
97018010 Wire Panel Cover and Wire Harness -
Assembly
98010102 Electrical Knockout Plate f/ Top of Hsg.
97018014 I-Joist Spacer Block (Contains 2 ) -
4-Required for 4 - Pack
SQTHB1 Hanger Bar Kit
97016449 Damper/Duct Connector - 4"
QTXR000HL
Housing 4- Pack Fan/Light
97016466 Housing
97018011 Wire Panel Cover and Wire Harness -
Assembly
98010102 Electrical Knockout Plate f/ Top of Hsg.
97018014 I-Joist Spacer Block (Contains 2 ) -
4 - Required for 4 Pack
SQTHB1 Hanger Bar Kit
97016449 Damper/Duct Connector - 4"
QTXRN000HL
NuTone Housing 4- Pack Fan/Light
97016466 Housing
97018011 Wire Panel Cover and Wire Harness -
Assembly
98010102 Electrical Knockout Plate f/ Top of Hsg.
97018014 I-Joist Spacer Block (Contains 2 ) -
4-Required for 4 Pack
SQTHB1 Hanger Bar Kit
97016449 Damper/Duct Connector - 4"