Spec Sheet

REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
SPECIFICATION SHEET
70D 99044034B
The latest in ventilation technology - packs a high cfm /
low sone blower assembly into a compact housing.
FEATURES
GRILLE:
• White polymeric - blends well with any decor
• Torsion spring grille mounting - no tools required
• Metal grille kit available - purchase separately
MOTOR:
• Plug-in, permanently lubricated
• Broan-designed polymeric blower wheel
• Snap in/out motor assembly for easy cleaning - no
screws to drive or drop
HOUSING:
• Compact, 25-gauge galvanized steel - attaches easily to
wall or ceiling joists
• Doublestrengthmountingangeswithkeyholeslots
• Removable wiring cover - make connections away from
tight corners
• No electrical knockout to remove
• Polymericductttingwithtaperedsleeveforeasy,
positive duct connection
• Quiet polymeric damper prevents cold backdrafts - no
metallic clatter
• U.L. Listed for use over bathtubs and showers when
connected to a GFCI protected branch circuit
CONTROLS DESIGNED FOR USE WITH THIS PRODUCT
(purchase separately):
• Model 59V (Ivory) / 59W (White) 60-Minute Time Control
• Model 69V (Ivory) / 69W (White) Single Function Control
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 1.5 70 4.0 3” Round
MODEL 771
CEILING / WALL FAN
TYPICAL SPECIFICATION
Ventilator shall be Broan Model 771.
Ventilator shall have galvanized steel housing with double-
strengthmountinganges.Itshallbeductedvertically
(horizontally) to a roof cap (wall cap).
Motor assembly shall be removable and permanently
lubricated.
Air delivery shall be no less than 70 cfm and sound level
no greater than 4.0 Sones. All air and sound ratings shall
becertiedbyHVI.UnitshallbeU.L.Listed.
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed
by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers.
Product performance is rated at 0.1 in. static
pressure, based on tests conducted in AMCA’s
state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based on
laboratory measurements.