Product Overview

ManualsBrandsBroan ManualsCooling & Air QualityFlex™ Series Ventilation Fan Housing Pack with Flange Kit

Broan Hartford, Wisconsin www.broan.com 800-558-1711

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

SPECIFICATION SHEET

91B 1100247B

MODEL AE50110DC

FLEX DC

SERIES FAN

DESCRIPTION

BLOWER:

• Plug-in, permanently lubricated, brushless DC motor -

engineered for continuous operation

• Dynamically balanced centrifugal blower wheel for quiet,

efficient performance

• Low RPM for quiet operation

• Selectable settings of 50, 80 or 110 CFM

HOUSING:

• Rugged, 26 gauge, galvanized steel construction

• Polymeric, 4” damper / duct connector with tapered

sleeve and no metallic clatter

• 5-3/4” height allows for 2” x 6” ceiling installations

• Sturdy, easy, four-point mounting directly to joist

• Can be mounted in sloped ceilings (duct connector must

point up)

• Can be installed in a wall if mounted 8-ft. or more above

the floor (duct connector must point up)

• Optional snap-on flange kit

GRILLE:

• Polymeric construction

• Innovative design - the result of extensive research with

designers and consumers

U.L. Listed for use over bathtubs and showers when

connected to a GFCI protected branch circuit (ceiling

mount only)

Acceptable for use in insulated ceilings (Type I.C.)

3-Year Warranty

TYPICAL SPECIFICATION

Fan shall be Broan Model AE50110DC.

Fan shall have corrosion resistant galvanized steel housing

with four-point mounting capability. It shall be ducted to a

roof or wall cap using 4” round ductwork.

Blower assembly shall be removable, have a centrifugal

blower wheel and a permanently lubricated brushless DC

motor designed for continuous operation.

Non-metallic damper/duct connector shall be included.

Air delivery shall be no less than the airflow values and

no greater than the sound level values listed in the HVI

Performance Ratings provided in this specification (see

following chart). All air and sound ratings shall be certified

by HVI.

Fan shall be acceptable for use in insulated ceilings (Type

I.C.) and U.L. Listed for use over bathtubs and showers

when connected to a GFCI protected branch circuit.

Summary of content (2 pages)

PAGE 1
SPECIFICATION SHEET MODEL AE50110DC FLEX DC TM SERIES FAN DESCRIPTION TYPICAL SPECIFICATION BLOWER: • Plug-in, permanently lubricated, brushless DC motor engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Low RPM for quiet operation • Selectable settings of 50, 80 or 110 CFM Fan shall be Broan Model AE50110DC.
PAGE 2
PERFORMANCE RATINGS - MODEL AE50110DC FLEX DCTM SERIES FAN Speed Setting 50 80 110 Static Pressure (In. H2O) AIR FLOW PERFORMANCE Airflow Sound (CFM) (Sones) Power (Watts) Efficacy (CFM/W) 0.1 50 < 0.3 3.4 14.7 0.25 36 0.5 5.3 6.7 0.1 80 0.4 6.5 12.6 0.25 71 0.9 9.4 7.6 0.1 110 0.9 10.6 10.4 0.25 105 1.4 14.9 7.