Specification Sheet
Broan Hartford, Wisconsin www.broan.com 800-558-1711
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
SPECIFICATION SHEET
81K 1100248A
MODEL AE50110DCL
FLEX DC
TM
SERIES
FAN / LIGHT
DESCRIPTION
BLOWER:
• Plug-in, permanently lubricated, brushless DC motor -
engineered for continuous operation
• Dynamically balanced centrifugal blower wheel for quiet,
efficient performance
• Low RPM for quiet operation
• Selectable settings at 50, 80 or 110 CFM
HOUSING:
• Rugged, 26 gauge, galvanized steel construction
• Polymeric, 4” damper / duct connector with tapered sleeve and
no metallic clatter
• 5-3/4” height allows for 2” x 6” ceiling installations
• Sturdy, easy, four-point mounting directly to joist
• Can be mounted in ceilings up to 7/12 pitch
• Optional snap-on flange kit
GRILLE:
• Polymeric construction
• Innovative design - the result of extensive research with
designers and consumers
• 11-Watt integrated LED lighting for energy efficiency
• 3500K color temperature provides soft white light - ideal for
bathroom illumination
• LED lasts up to 25,000 hours for maintenance-free
convenience
DIMMING CONTROLS:
• For a list of compatible dimming controls, see the
RESOURCES link for Model AE50-110DCL at
www.broan.com
• Each application is unique and various factors such as load,
common neutrals or other electrical products on the circuit can,
in certain instances, cause variance in system performance
• Dimmer model numbers vary slightly depending on color,
packaging type, etc. such that variations of model numbers
may be suitable. Consult dimming system manufacturer for
additional support in operation
U.L. Listed for use over bathtubs and showers when
connected to a GFCI protected branch circuit (ceiling mount
only)
U.L. Listed for use in insulated ceilings (TYPE I.C.)
3-Year Warranty
JA8-2019
TYPICAL SPECIFICATION
Fan / Light shall be Broan Model AE50110DCL.
Fan / Light shall have corrosion resistant galvanized steel
housing with four-point mounting capability. It shall be ducted
to a roof or wall cap using 4” round ductwork.
Blower assembly shall be removable, have a centrifugal
blower wheel and a permanently lubricated brushless DC
motor designed for continuous operation.
Non-metallic damper/duct connector shall be included.
LED module shall be 11-Watt with 3500K color temperature
and 800 lumen output (min.).
Air delivery shall be no less than the airflow values and
no greater than the sound level values listed in the HVI
Performance Ratings provided in this specification (see
following chart). All air and sound ratings shall be certified by
HVI.
Fan / Light shall be U.L. Listed for use in insulated ceilings
(Type I.C.) and for use over bathtubs and showers when
connected to a GFCI protected branch circuit.