Spec Sheet

ManualsBrandsBroan ManualsAppliancesNuTone Flex Series Ventilation Fan with 80 CFM, EzDuct Connector, Energy Star Rated and TrueSeal Damper in White

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

Broan Hartford, Wisconsin www.nutone.com 888-336-3948

Venmar Ventilation ULC Drummondville (Quebec), Canada www.nutone.ca 888-882-7626

SPECIFICATION SHEET

91J 99045297G

MODELS AEN50,

AEN80 & AEN110

FLEX

SERIES FANS

DESCRIPTION

BLOWER:

• Plug-in, permanently lubricated motor - engineered for

continuous operation

• Dynamically balanced centrifugal blower wheel for quiet,

efficient performance

• Low RPM for quiet operation

HOUSING:

• Rugged, 26 gauge, galvanized steel construction

• Polymeric, 4” duct connector with tapered sleeve and no

metallic clatter

• 5¾” height allows for 2” x 6” ceiling installations

• Sturdy, easy, four-point mounting directly to joist

• Can be mounted in ceilings up to 7/12 pitch

• Can be installed in a wall if mounted 8-ft. or more above

the floor

GRILLE:

• Polymeric construction

• Innovative design - the result of extensive research with

designers and consumers

CONTROLS (Purchase separately):

• Refer to Broan’s catalog for a complete line of

accessories to effectively adapt these fans to your

construction requirements.

U.L. Listed for use over bathtubs and showers when

connected to a GFCI protected branch circuit (ceiling

mount only).

3-Year Warranty

TYPICAL SPECIFICATION

Fan shall be NuTone Model AEN50 (AEN80) (AEN110).

Fan shall have corrosion resistant galvanized steel housing

with four-point mounting capability. It shall be ducted to a

roof or wall cap using 4” round ductwork.

Blower assembly shall be removable, have a centrifugal-

type blower wheel and a permanently lubricated motor

designed for continuous operation.

Non-metallic damper/duct connector shall be included.

Air delivery shall be no less than the airflow values and

no greater than the sound level values listed in the HVI

Performance Specifications provided in this specification

(see following chart). All air and sound ratings shall be

certified by HVI.

Ceiling Ventilator shall be U.L. Listed for use over bathtubs

and showers when connected to a GFCI protected branch

circuit.

Summary of content (4 pages)

PAGE 1
SPECIFICATION SHEET MODELS AEN50, AEN80 & AEN110 FLEXTM SERIES FANS DESCRIPTION TYPICAL SPECIFICATION BLOWER: • Plug-in, permanently lubricated motor - engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Low RPM for quiet operation Fan shall be NuTone Model AEN50 (AEN80) (AEN110).
PAGE 2
PERFORMANCE RATINGS FLEXTM SERIES FANS HVI PERFORMANCE AIR FLOW PERFORMANCE ModelAEN50 AE50 Model 0.25 Ps Model Airflow (CFM) Sound (Sones) Power (Watts) Efficacy (CFM / W) Airflow (CFM AEN50 50 0.5 20.0 3.55 37 AEN80 80 0.8 26.9 2.97 60 AEN110 110 1.0 23.4 4.71 92 HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers.
PAGE 3
FICHE TECHNIQUE VENTILATEURS DE SÉRIE FLEX MC MODÈLES AEN50, AEN80 ET AEN110 DESCRIPTION SPÉCIFICATIONS TYPES VENTILATEUR : • Moteur enfichable, lubrifié à vie, conçu pour un fonctionnement continu • Roue de ventilateur centrifuge équilibrée dynamiquement assurant une performance silencieuse et optimale • Bas régime de rotation permettant un fonctionnement silencieux Le ventilateur doit être le modèle NuTone AEN50 (AEN80) (AEN110).
PAGE 4
ÉVALUATIONS DE RENDEMENT VENTILATEURS DE SÉRIE FLEX MC PERFORMANCE HVI RENDEMENT DU DÉBIT DE L'AIR Débit de l'air (pi3/min) Niveau sonore (sone) AEN50 50 0,5 20,0 3,55 37 AEN80 80 0,8 26,9 2,97 60 AEN110 110 1,0 23,4 4,71 92 Modèle ModèleAEN50 AE50 Modèle 0,25 Ps Puissance Efficacité (Watts) (pi3/min / W) 0.