Spec Sheet

SPECIFICATION SHEET ALT1 SERIES
Under-Cabinet
ALTA
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers.
Product performance is rated at 0.1 and 0.25 in. static pressure at high speed based on tests conducted in an HVI-approved state-of-the-art test laboratory. Sones are a measure of humanly-
perceived loudness, based on laboratory measurements.
Broan-NuTone LLC | 926 West State Street, Hartford, WI 53027 | 1 800-558-1711 | www.Broan-NuTone.com
* Where noted performance rating is not HVI certified but was established in accordance with HVI Standardized test procedure.
** Max. blower CFM indicates the performance of the hood blower in open air.
The sculpted lines of Alta™ bring an exciting, new choice to typical range hood shapes. Sophisticated curves and
hidden controls offer a beautiful alternative to traditional designs.
SIZE BLACK STAINLESS WHITE
GREASE FILTERS
(replacement)
NON-DUCTED FILTERS
30 in. ALT130BL ALT130SS ALT130WW HPFAMM30 (Type "C1" / "C2") HPF30 (Type "Xc")
36 in. ALT136BL ALT136SS ALT136WW HPFAMM36 (Type "D1" / "D2") HPF36 (Type "Xd")
99046183C
Dimensions
shown in inches.
FEATURES
Max. Blower CFM** 300
Control type 2-speed Rocker
Delay off no
Filter Clean Reminder no
Heat Sentry™ no
ADA Capable yes
Lighting 2-level Halogen (included)
Grease Filters Micro Mesh (Qty. 2)
Installation Hardware EZ1 Bracket
ENERGY STAR
®
no
Recirculation Non-ducted filters sold separately
AC INPUT
120 V, 60 Hz - 1.4 AMPS
OPTIONAL ACCESSORIES
7-in. Round Damper BP87Q
Make-up Air Dampers MD6TU, MD8TU and MD10TU
MOUNTING HEIGHT
18 in. to 24 in. from cooktop to bottom of hood
LIMITED WARRANTY
1-year (See installation manual for full warranty text.)
FOR INDOOR USE ONLY
0
0.1
0.2
0.3
0.4
0 50 100 150 200 250 300 350 400
Stac pressure (in. w.g.)
Ai rfl ow (cfm)
B1 With F2 Filtraon
Vercal High Speed,
7-in. round
Vercal High Speed,
wi th 3¼ in. x 10 in. da mper
Horizontal High Speed,
with 3¼ in. x 10 in. damper
HVI PERFORMANCE
Duct Orientation Size Damper
Sones CFM
Normal Medium* High Normal Medium*
High
0.25 in. w.g.
High
0.1 in. w.g.
Vertical - Rectangular 3¼ in. x 10 in. Included 1.5 3.0 5.0 130 180 125 220
Horizontal - Rectangular 3¼ in. x 10 in. Included 1.5 3.0 5.0 110 150 115 210
Round - Vertical 7 in. Sold Separately 1.5 3.0 5.0 140 190 100 240