Installation Sheet

12. INSTALL THE DECORATIVE FLUE (CONTINUED)

DUCTED INSTALLATION:

Slide up the upper flue until it is aligned with its mounting bracket. The bracket must be inside

the flue. Secure the upper flue to its bracket using 2 M4 x 12 Phillips round head screws.

NOTE: Duct not shown in illustration to ease understanding.

Remove protective plastic film covering the upper flue and the hood.

HO0295

UPPER FLUE MOUNTING BRACKET

FRONT VIEW

UPPER

FLUE

13. REINSTALL GREASE FILTER(S)

ALL INSTALLATIONS:

To reinstall the grease filters, align rear filter tabs with slots in the hood. Pull

down the metal latch tab, push each filter into position and release. Make

sure filters are securely engaged after installation.

HD1161

HA0145

HO0293

NON-DUCTED INSTALLATION:

Slide up the upper flue until it is aligned with the plenum. Secure the upper flue to the

plenum using 2 M4 x 12 Phillips round head screws.

Remove protective plastic film covering the upper flue and the hood.

NON-DUCTED INSTALLATION:

Install a charcoal filter (included in the non-duct kit) on each aluminum grease

filter back (A). Hold the charcoal filter in place by inserting both ends of

3 metal strips (included in the non-duct kit) in each aluminum grease filter

frame (B).