Spec Sheet

www.broan.com B12LCd190528
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-877-862-7626)
Project: REMARKS
Location:
Model No.: B12LC
Quantity:
Submitted by: Date:
NOTE: All specications are subject to change without notice.
effectivenessenergy Performance
pOlyprOpylene cOre EffEctivEnEss
supply
temperature
nEt
Air flow
sensible latent tOtal
°F °C cfm l/s % % %
heating
35 1.7 600 283 57 0 38
35 1.7 450 212 63 0 42
Cooling
95 35 600 283 55 0 21
95 35 450 212 60 0 23
aluminum cOre EffEctivEnEss
supply
temperature
nEt
Air flow
sensible latent tOtal
°F °C cfm l/s % % %
heating
35 1.7 600 283 54 0 36
35 1.7 450 212 57 0 38
Cooling
95 35 600 283 52 0 20
95 35 450 212 56 0 21
pOlymerized paper cOre (Hm) EffEctivEnEss
supply
temperature
nEt
Air flow
sensible latent tOtal
°F °C cfm l/s % % %
heating
35 1.7 600 283 60 47 56
35 1.7 450 212 65 53 61
Cooling
95 35 600 283 60 38 46
95 35 450 212 63 45 52
Unit PErformAncE, sEnsiblE EffEctivEnEss
HEAting sUPPly tEmPErAtUrE
35°F / 1.7°C
Airflow (cfm)
450 700 950 1200
PolyProPylene 70 61 54 51
aluminum 63 57 63 50
Polymerized PaPer (hm) 75 70 67 64
Unit PErformAncE, totAl EffEctivEnEss
cooling sUPPly tEmPErAtUrE
95°F / 35°C
Airflow (cfm)
450 700 950 1200
Polymerized PaPer (hm) 47 41 37 35
accoustic noise PoWer chart (dBa) at unit Ports
The data shown on left chart come from measurement performed according
to ISO 5136 Standard. These data represent the sound power directly
measured at the fresh air distribution port and exhaust air from building
port. To get the actual noise level in the room, consider noise attenuation
resulting from total ductwork installation.
Airow
Fresh air
to building port
Exhaust air
from building port
1026 CFM at 0.4 in. w.g. 74.8 dBA 58.5 dBA
767 CFM at 0.2 in. w.g. 71.5 dBA 56.3 dBA
sPecifications
• Models: 12LC and V12LC • Filters: 6 reticulated washable foam • Supply and exhaust blower motors: • Fans speed control:
lters (20 ppi) - Motor type: PSC motors with sealed - Low, medium and high speeds
• All duct connections: 20” x 8” 3 disposable MERV 8 lters sleeved bearings - 2 speeds available to user
• Housing: 20 ga. pre-painted steel (optional) part no. SV63342 3 speeds (2 available to customer) - Low or medium speed is selected
• Mounting: Reinforced rubber straps • Mounting: Reinforced rubber straps - R.P.M.: 1625 - H.P.: 1/3 at the time of installation
• Drains: 3/4” threaded ttings - Fan type: direct drive • Unit electrical characteristics:
• Insulation:1” foil faced and centrifugal blower 7 ¹/” x 6” Volts MCA MOP Watts
1”
acoustic berglass wool
- Housing: galvanised steel 120 14.3 20.0 1275