Installation Guide
Step 5. Install Diffuser Cover
Place the hooks of the front diffuser
cover into the slots at the base of
the dehumidier before fastening.
SECURE BOTH
HOOKING LOCATIONS
SCREW C OR D
Locate the four holes on the diffuser cover and fasten to the dehumidier using
either Screw C (Tamper Resistant) or Screw D (Phillips Head) included with the
unit. Using the tamper resistant screws requires the ¼" Hex T-15 Torx Security
Bit included with the unit.
TOLL-FREE 1-800-558-1711
•
www.Broan-Nutone.com