Specifications
SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada Mississauga, Ontario www.broan.ca 877-896-1119
21C 99044958A
Especially designed to be installed outdoors
in a covered patio or lanai area. For use over
residential commercial-style cooking surfaces or
gas and electric grills. This unit is not for use with
a charcoal grill. A complete installation requires
several optional components. Refer to page 2 when
planning your installation.
FEATURES
•
Professional outdoor design.
•
27” depth handles heat and size of outdoor grills.
(optional 3” wall extension to increase depth to 30”).
•
Brushed corrosion resistant 304 Stainless Steel.
•
Two widths: 36’’ and 48’’.
•
Powerful, 1100 CFM internal blower - tested to assure
operation in corrosive environments.
•
Bright halogen lighting (2 x 50 watt GU10 for 36” hood,
3 x 50 watt GU10 for 48” hood) (bulbs not included).
•
3-speed rotary control - tested to assure operation in
corrosive environments.
•
304 Stainless Steel baffle filters - easily accessible and
dishwasher-safe.
•
Removable grease tray - easy to clean.
•
Heat Sentry
TM
detects excessive heat and adjusts blower
speed automatically.
•
UL Listed for use in damp locations when properly
connected to a GFCI circuit.
EPD61 SERIES
RANGE HOOD
U
L
US
C
SPECIFICATIONS
VOLTS HZ AMPS CFM SONES DUCT
120 60 9.0 MAX. 1100 11. 0 10” ROUND
WALL EXTENSION (optional)
•
Extends front of hood out an extra 3” (to 30”) - eliminates
custom wall bump-outs.
•
Stainless Steel construction - matches range hood.
•
Attaches to wall and back of range hood.
Model AWEPD36SS - 36’’ width
Model AWEPD48SS - 48’’ width
FLUE COVER (optional)
•
Stainless Steel construction - matches range hood.
•
Attaches to top of range hood shell.
•
Hides ducting and wipes clean easily.
•
Extended depth available for hoods using the 3” wall
extension.
Model AEEPD6SS - 6” high - for 8-ft. ceiling - standard depth
Model AEEPD6SSE - 6” high - for 8-ft. ceiling - extended depth
Model AEEPD18SS - 18” high - for 9-ft. ceiling - standard depth
Model AEEPD18SSE - 18” high - for 9-ft. ceiling - extended depth
Model AEEPD30SS - 30” high - for 10-ft. ceiling - standard depth
Model AEEPD30SSE - 30” high - for 10-ft. ceiling - extended depth
HVI-2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating
Institute, for off-the-shelf products, as
they are available to consumers. Product
performance is rated at 0.1 in. static
pressure, based on tests conducted in a
state-of-the-art test laboratory. Sones are
a measure of humanly-perceived loudness,
based on laboratory measurements.