Specification Sheet

SPECIFICATION SHEET
Broan-NuTone LLC Harford, Wisconsin www.broan-nutone.com 800-558-1711
Venmar Ventilation ULC Drummondville, Québec www.broan.ca 877-896-1119
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
WALL EXTENSION (optional)
•
Extends front of hood out an extra 3” (to 30”) - eliminates
custom wall bump-outs.
•
Stainless Steel construction - matches range hood.
•
Attaches to wall and back of range hood.
Model AWEPD36SS - 36-in. width
Model AWEPD42SS - 42-in. width
Model AWEPD48SS - 48-in. width
Model AWEPD60SS - 60-in. width
FLUE COVER (optional)
•
Stainless Steel construction - matches range hood.
•
Attaches to top of range hood shell.
•
Hides ducting and wipes clean easily.
•
Extended depth available for hoods using the 3” wall extension.
Model AEEPD6SS - 6-in. high - for 8-ft. ceiling - standard depth
Model AEEPD6SSE - 6-in. high - for 8-ft. ceiling - extended depth
Model AEEPD18SS - 18-in. high - for 9-ft. ceiling - standard depth
Model AEEPD18SSE - 18-in. high - for 9-ft. ceiling - extended depth
Model AEEPD30SS - 30-in. high - for 10-ft. ceiling - standard depth
Model AEEPD30SSE - 30-in. high - for 10-ft. ceiling - extended depth
Model AEEPD2445SS - collapsed height: 24” - maximum
height 45” - standard depth
Model AEEPD2445SSE - collapsed height: 24” - maximum
height 45” - extended depth
02H 99044958E
Especially designed to be installed outdoors
in a covered patio or lanai area. For use over
residential commercial-style cooking surfaces or
gas and electric grills. This unit is not for use with
a charcoal grill. A complete installation requires
several optional components. Refer to page 2 when
planning your installation.
FEATURES
•
Professional outdoor design.
•
27-inch depth handles heat and size of outdoor grills
(optional 3” wall extension to increase depth to 30”).
•
Brushed corrosion resistant 304 Stainless Steel.
•
Four widths: 36, 42, 48, and 60 inches.
•
Powerful, 1100 CFM internal blower - tested to assure
operation in corrosive environments.
•
Bright halogen lighting (2 x 50 watts GU10 for 36-in. & 42-in.
hoods, 3 x 50 watts GU10 for 48-in. & 60-in. hoods) (bulbs
not included).
•
3-speed rotary control - tested to assure operation in
corrosive environments.
•
304 Stainless Steel baffle filters - easily accessible and
dishwasher-safe.
•
Removable grease rail - easy to clean.
•
Heat Sentry™ detects excessive heat and adjusts
blower speed automatically.
•
UL and cUL listed for use in damp locations when
properly connected to a GFCI circuit.
EPD61 SERIES
RANGE HOOD
SPECIFICATIONS
VOLTS HZ AMPS CFM SONES DUCT
120 60 9.0 MAX. 1160 11.0 10-in. ROUND
HVI-2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available
to consumers. Product performance is rated at
0.1 in. static pressure, based on tests conducted
in a state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based
on laboratory measurements.
PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
AIR FLOW PERFORMANCE
HG0075A
STATIC PRESSURE (IN. W.G.)
AIR FLOW RATE (CFM)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0 200 400 600 800 1000 1200 1400