Installation Sheet

15. REINSTALL FILTERS

Rest filters springs in range hood inside rear groove. Using finger cup, tilt up the filters into position.

Make sure both screws located in the front panel edge of the hood are securely engaged in both

filters oval holes (A) after installation.

HD0939

16. LIGHTING

WARNING

Do not touch lamps during or soon after operation. Burns may occur. In order to prevent the risk of personal injury,

only install shielded halogen lamps. Also, never install a cool beam, a dichroic lamp, a lamp not suitable for use in

recessed luminaires or identified for use in enclosed fixtures.

NOTE: The suction cup tool (included with hood) can be used to install and remove light bulbs. Press suction cup tool on bulb and rotate

counterclockwise to remove bulb or clockwise to install bulbs.

1. Align the bulb leads with the small indentations located on the border of the lamp location on hood (see inset above), then

install the bulbs by placing the bulb leads into their grooves in the socket.

2. Gently push upwards and turn clockwise until secure.

HR0124

BULB LEADS

SUCTION CUP

TOOL

BULB LEAD GROOVES

(IN SOCKET)

CAUTION

Most GU10 LED replacement bulbs commonly found on the market are not designed for use in a cooking

environment and might not perform as advertised. Their usage with this product is not recommended.

The Broan Elite EW54 Series range hoods require two shielded Halogen Bulbs (120 V, 50 W max., MR16 or PAR16 with

GU10 base), included. See service parts list for replacement bulbs.