Spec Sheet

ManualsBrandsBroan ManualsAppliancesFIN-180B Fresh In Basic Supply Fan with 180 CFM, Washable Aluminum Filter and Energy Star Certified in Stainless Steel

BROAN™ Fresh In Basic

FIN-180B; see table for available part numbers.

30-180 CFM at 0.2 in. w.g.

30-170 CFM at 0.4 in. w.g.

VB0260

The Broan Fresh In series is a quiet and e ective supply air

solution for hot and mixed climates, o ering renewed fresh

air comfort. It o ers the greatest reduction of HERS score

compared to CIFS solutions. Thanks to their ECM motors, the

Basic FIN-180B and FIN-180B-HW models deliver energy-

e cient continuous ventilation at a constant air ow in typical

installations. Designed to be the most versatile, reliable and

energy-e cient supply fan on the market, it can also be installed

horizontally, vertically, upside down, or  ush to the ceiling. Two

models are available: with a power cord or hardwired.

Mechanical components

• High e ciency ECM motor

• Constant air ow blower designed to maintain the selected air ow

in standard installations

• Silent ventilation with balanced metallic dual inlet blower wheel

• Spring loaded damper

• Blower e ciency as high as 12.4 CFM/W

• Protection grille for blower

Electronic features

• Adjustable speed from 30 to 180 CFM in 10 CFM increments

Installation features

• Five installation possibilities: ceiling hung,  ush to ceiling,

attic mounted, ceiling mounted and wall mounted

• Paintable door and frame

• Compact and designed to  t between 12-in. cc joists

• 6-in. diameter ports with integrated test ports and bumps to

maintain tie-trap in place

• 6-ft. power cord (FIN-180B) or hardwired (FIN-180B-HW)

• Easy maintenance: can be done within 5 minutes through the

access door

Options

• 9.25" x 9.25" x 2" MERV 8  lter (FIN-MERV 8)

• 9.25" x 9.25" x 2" MERV 13  lter (FIN-MERV 13)

• Paintable decorative  nishing trim (FIN-R1015)

for discreet installation

• Installation bracket, including hardware, for installation between

joists of 16-in. cc and 24-in. cc (FIN-S1624)

Warranty

The BROAN™ Fresh In Basic is protected by a 5-year warranty on parts

only.

Requirements and standards

When properly installed and set, this unit will meet requirements of:

• EPA Indoor airPLUS, Version 1

• 2012 & 2015 IECC, Version 2018

• 2012 & 2015 IRC, Version 2018

• ENERGY STAR Certified Homes, Version 3

• ASHRAE 62.2-2010 & 62.2-2016

• Characteristics

FIN-180B FIN-180B-HW

Power 6-ft. power cord Hardwired

Noise level 0.65 sone at 130 CFM

Weight 11 lb.

Shipping weight 14.5 lb.

Ports diameter 6 in.

Width 10 ¼ in.

Length 14 ¾ in. (without ports)

Height 10 in.

Min. operating

temperature

14 °F

FIN-180B

FIN-180B-HW

Hardwired

6-ft. power cord

Summary of content (8 pages)

PAGE 1
BROAN™ Fresh In Basic FIN-180B; see table for available part numbers. 30-180 CFM at 0.2 in. w.g. 30-170 CFM at 0.4 in. w.g. The Broan Fresh In series is a quiet and effective supply air solution for hot and mixed climates, offering renewed fresh air comfort. It offers the greatest reduction of HERS score compared to CIFS solutions. Thanks to their ECM motors, the Basic FIN-180B and FIN-180B-HW models deliver energyefficient continuous ventilation at a constant airflow in typical installations.
PAGE 2
Mounting options Can be installed as a stand alone unit or connected to the return ducting of an AHU. Ceiling Hung Attic Mounted Under Ceiling Flush to Ceiling 12" Wall Mounted 12" 10" VH0154 10¼" 10" VD0467 VH0153A VD0466 With optional decorative trim 10" 14¼" clearance VH0152 Electricity Consumption Airflow setting (CFM) MERV 13 Main Filter Static Pressure (in. w. g.) 30 60 90 120 180 0.1 0.2 0.1 0.2 0.1 0.2 0.4 0.1 0.2 0.4 0.1 0.2 0.4 Power (Watts) 4.8 6.8 7.
PAGE 3
Installation Zones VN0011A Installation allowed in zones 1-4. Refer to the installation instructions for more details. Insulated door 14¼" Unit setting Damper assembly Test port Electronic board Blower motor Filter Blower wheel Insulated housing Product specifications are subject to change without notice.
PAGE 4
A&E Specs Performance Requirements • Unit’s blower shall be designed to maintain a constant airflow in typical installations • Noise level shall be lower than 0.65 sone at 130 CFM, 0.2 in w.g. • Unit speed shall be selectable from 30 to 180 CFM in 10 CFM increments. • Backdraft damper shall have a magnet to prevent flickering and stay closed during door blower test. • Unit’s blower efficiency shall be at least 8.3 CFM/W at 120 CFM, 0.2 in. w.g.
PAGE 5
BROAN™ Fresh In Basic FIN-180B; consulte la tabla para los números de piezas disponibles FIN-180B 30-180 pi3/min. a 0,2 pulg. de agua 30-170 pi3/min. a 0,2 pulg. de agua La serie Broan Fresh In es una solución de aire de suministro silenciosa y eficaz para climas cálidos y mixtos, que ofrece aire fresco renovado. Ofrece la mayor reducción de puntuación HERS (sistema de medición energética de una casa) en comparación con las soluciones CIFS.
PAGE 6
Opciones de montaje Se puede instalar como aparato autónomo o conectado a los conductos de retorno de una unidad de acondicionamiento del aire (AHU).
PAGE 7
Zonas de instalación Marino (C) Seco (B) Húmedo (A) VN0011E (Incl. Hawái) Instalación permitida en las zonas 1-4. Consulte la instrucciones de instalación para mayor información. Puerta aislada 14¼" Conjunto de la compuerta Config. del aparato Puerto de prueba Tarjeta electrónica Motor del ventilador impelente Filtro Rueda del ventilador Carcasa aislada Las especificaciones del producto están sujetas a cambios sin previo aviso.
PAGE 8
Especificaciones de arquitectura e ingeniería Requisitos de funcionamiento • El ventilador del aparato deberá ser diseñado para mantener una corriente de aire constante en instalaciones normales • El nivel de ruido deberá ser inferior a 0,65 sonio a 130 pi3/min, 0,2 pulg. de agua • La velocidad del aparato deberá poderse seleccionar de 30 a 180 pi3/min con incrementos de 10 pi3/min.