Specification Sheet

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Broan-NuTone LLC, 926 West State Street, Hartford, Wisconsin 53027 (1-800-637-1453)
Broan-NuTone Canada, 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
LOSONE SELECT
®
CEILING MOUNT VENTILATORS
L100 SERIES & L150 SERIES
Incredibly reliable. Unbelievably quiet. Offering the CFM
choices you need at the lowest sound levels in the industry.
FEATURES
GRILLE:
• Conceals interior
• Low profile styling blends with any decor
• White polymeric (“MG” models - metal, finished with
white painted enamel)
BLOWER:
• Low RPM for quiet operation
• Resilient anti-vibration mounts
• Dynamically-balanced, polymeric, centrifugal blower
wheel for quiet, efficient performance
• Permanently lubricated, thermally protected motor
• Plug-in motor rated at 120 VAC
• Designed for continuous operation
HOUSING:
• Rugged, 20 gauge galvanized steel
• 6” round duct connector
• 1/2” acoustic insulation inside
• May be installed in ceiling or wall (size permitting)
• 8-position mounting brackets for easy installation and
greater adaptability to various mounting requirements
• Automatic backdraft damper located within duct connector
• Factory-shipped in horizontal discharge position - easily
converted to vertical discharge
• May be installed as an in-line ventilator with addition of
accessory kit Model 961L (see “Accessories”)
ACCESSORIES (purchase all separately):
• Model 57V (Ivory) / 57W (White) Electronic Variable Speed
Control
• Model 59V (Ivory) / 59W (White) 60-Minute Time Control
• Model 61V (Ivory) / 61W (White) 15-Minute Time Control
• Model 71V (Ivory) / 71W (White) 12-Hour Time Control
• Electronic Variable Speed Controls – Model 72V (120 VAC)
• Model 961L In-line Adapter Plate
• Model RD1 Radiation Damper
TYPICAL SPECIFICATION
Ventilator shall be Broan Model L100, (L100MG), (L150),
(L150MG).
Ventilator shall have galvanized steel housing insulated with
at least 1/2” of acoustic insulation. Housing to have adjustable
mounting brackets.
Automatic backdraft damper to be located within duct
connector. Duct connector, blower assembly and wiring plate
shall be adjustable for either horizontal or vertical installation.
Blower unit shall be removable from housing and will have a
polymeric, dynamically balanced centrifugal-type blower
wheel. Motor to be permanently lubricated and mounted with
resilient anti-vibration mounts. RPM not to exceed number
listed for each model.
Air delivery shall be no less and sound levels no greater than
listed for each model. All air and sound ratings shall be
certified by AMCA. Units to be UL and cUL listed.
“Broan-NuTone LLC certifies that
the models shown herein are
licensed to bear the AMCA Seal.
The ratings shown are based on
tests and procedures performed
in accordance with AMCA
Publication 211 (and AMCA
Publication 311 if sound is also
certified) and comply with the
requirements of the AMCA
Certified Ratings Program”
50G 99042731E
UL listed for use over
bathtubs and showers when
connected to a GFCI-
protected branch circuit.