Specification Sheet

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Broan-NuTone LLC, A Nortek Company, Hartford, Wisconsin 53027 (1-800-548-0790)
Broan-NuTone Canada, A Nortek Company, Mississauga, Ontario, L5T 1H9 (905-670-2500)
LOSONE SELECT
®
IN-LINE VENTILATORS
MODELS L400L, L400KL,
L500L, L500KL, L700L
Incredibly reliable. Unbelievably quiet. Offering
the CFM choices you need at the lowest sound
levels in the industry.
FEATURES
BLOWER:
•
Low RPM for quiet operation
•
Resilient anti-vibration mounts
•
Balanced, polymeric, centrifugal blower wheel for
quiet, efficient performance (Models L400KL &
L500KL - dynamically-balance metal wheel)
•
Permanently lubricated, thermally protected motor
•
Plug-in motor rated at 120 VAC
•
Designed for continuous operation
HOUSING:
•
Rugged galvanized steel
•
4½” x 18½” duct connector
•
May be installed in ceiling or wall (size permitting)
•
8-position mounting brackets for easy installation
and greater adaptability to various mounting
requirements
•
Automatic backdraft damper located within duct
connector
•
Factory-shipped in horizontal discharge position
•
Removable panel allows easy motor access without
disturbing ductwork
•
Models L400KL & L500KL suitable for kitchen
installations
CONTROLS:
•
Model 57V (Ivory) / 57W (White) 3-Amp, Electronic
Variable Speed Control
•
Model 59V (Ivory) / 59W (White) 60-Minute Time
Control
•
Model 61V (Ivory) / 61W (White) 15-Minute Time
Control
•
Model 71V (Ivory) / 71W (White) 12-Hour Time
Control
•
Model 72V (Ivory) / 72W (White) 6-Amp, Electronic
Variable Speed Control
TYPICAL SPECIFICATION
Ventilator shall be Broan Model L400L, (L400KL),
(L500L), (L500KL), (L700L).
Ventilator shall have galvanized steel housing. Housing
to have adjustable mounting brackets and removable
panel to allow motor access without disturbing ductwork.
Automatic backdraft damper to be located within duct
connector. Duct connector, blower assembly and wiring
plate shall be adjustable for either horizontal or vertical
installation.
Blower unit shall be removable from housing and will
have a polymeric (metal - L400KL & L500KL), balanced,
centrifugal-type blower wheel. Motor to be permanently
lubricated and mounted with resilient anti-vibration
mounts. RPM not to exceed number listed for each
model.
Air delivery shall be no less and sound levels no
greater than listed for each model. All air and sound
ratings shall be certified by AMCA. Units to be UL
listed.
“Broan-NuTone LLC certifies that
the models shown herein are
licensed to bear the AMCA Seal.
The ratings shown are based on
tests and procedures performed
in accordance with AMCA
Publication 211 (and AMCA
Publication 311 if sound is also
certified) and comply with the
requirements of the AMCA
Certified Ratings Program”
00C 99042735B