Technical Specifications

ManualsBrandsBroan ManualsBath130 CFM QT Quiet Series Ceiling Exhaust Bath Fan

Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

SPECIFICATION SHEET

41H 99044835B

MODEL QT130E

VENTILATION FAN

TYPICAL SPECIFICATION

• Fan shall be Broan Model QT130E.

• Fan shall have corrosion resistant galvanized steel housing

with four-point mounting capability. It shall be ducted to a

roof or wall cap using 6” round or 4” round ductwork.

• Blower assembly shall be removable, have a centrifugal-type

blower wheel, a permanently lubricated motor designed

for continuous operation, and mounted with resilient anti-

vibration mounts.

• 6” round non-metallic damper/duct connector and 6” round

to 4” round duct reducer shall be included.

• Air delivery shall be no less than 130 CFM and sound level

no greater than 1.5 Sones when using 6” duct connector

(130 CFM / 2.0 Sones when using 6” round to 4” round

duct reducer). All air and sound ratings shall be certified

by HVI.

• Fan shall be ENERGY STAR

qualified and have an energy

efficient permanent split capacitor motor.

• Fan shall be U.L. Listed for use over bathtubs and showers

when connected to a GFCI protected branch circuit.

DESCRIPTION

BLOWER:

• Plug-in, permanently lubricated motor - engineered for

continuous operation

• Dynamically balanced centrifugal blower wheel for

quiet, efficient performance

• Low RPM for quiet operation

• Resilient anti-vibration motor mounts

HOUSING:

• Rugged, 26 gauge, galvanized steel construction

• Polymeric, 6” round duct connector with tapered sleeve

and no metallic clatter

• 6” round to 4” round duct reducer included - allows

connection of 4” round ductwork

• 7-5/8” height allows for 2” x 8” ceiling installations

• Sturdy, easy, four-point mounting directly to joist

• Includes unique spacer (patented) for mounting to

engineered “I” joists

• Can be mounted in ceilings up to 12/12 pitch

GRILLE:

• Polymeric construction

• Innovative design - the result of extensive research with

designers and consumers

CONTROLS (Purchase separately):

• Refer to Broan’s catalog for a complete line of

accessories to effectively adapt these fans to your

construction requirements.

U.L. Listed for use over bathtubs and showers when

connected to a GFCI protected branch circuit (ceiling

mount only).

Can be used to comply with California Title 24.

3-Year Warranty

Summary of content (2 pages)

PAGE 1
SPECIFICATION SHEET MODEL QT130E VENTILATION FAN DESCRIPTION TYPICAL SPECIFICATION BLOWER: • Plug-in, permanently lubricated motor - engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Low RPM for quiet operation • Resilient anti-vibration motor mounts HOUSING: • Rugged, 26 gauge, galvanized steel construction • Polymeric, 6” round duct connector with tapered sleeve and no metallic clatter • 6” round to 4” round duct reducer included - al
PAGE 2
PERFORMANCE RATINGS MODEL QT130E FAN HVI PERFORMANCE Static Fan Model Pressure (Ps) CFM Sones Watts 0.10 130 1.5 49.0 0.25 114 QT130E 0.10 130 2.0 49.0 0.25 114 with 6” round duct connector with 6” round to 4” round duct reducer HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in.