Spec Sheet

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Exhaust your cooktop without the use of an
overhead hood. Compact design is installed directly
behind cooktop.
FEATURES
HOUSING:
•
Rugged steel construction
•
Silver paint and/or glavanized finish
•
Space-saving - can be used with most cooktops on the market
•
30", 36", or 48" widths - Fits standard-size cabinets (48" width
not available in Canada)
•
For indoor use only
BLOWER:
•
Dynamically-balanced 9-1/8" dia. x 2-1/8" centrifugal blower wheel
for quiet, efficient performance
• Max. Blower CFM*: 600
•
Permanently lubricated, thermally-protected motor
•
Neoprene, resilient anti-vibration mounts
•
Unit plugs directly into 120 VAC, 60 HZ, grounded outlet
•
Uses standard 3¼" x 10" duct connector
•
3-position discharge - scroll box moveable to adjust to floor joists
CHIMNEY ASSEMBLY:
•
Brushed stainless steel cover - just press button to turn unit "ON"
•
Chimney rises 9½" when activated - ideal for large pots and pans
•
Stylish, stainless steel filters with aluminum mesh - easy to remove
and dishwasher-safe
•
Stainless steel chimney front and back - makes cleanup quick
and easy
•
Flush-mounted, infinite rotary speed blower control
•
Heat Sentry
TM
adjusts speed of blower to HIGH in case of
excess heat
•
Conveniently located button - press to lower air vent and turn
unit "OFF"
•
OPTIONAL Remote Control (Model RMDDRBK) activates
downdraft from alternate location
TYPICAL SPECIFICATION
Downdraft blower system shall be Rangemaster
®
Model RMDD3004
(RMDD3604) (RMDD4804).
Unit shall be for indoor use only.
Unit to have steel housing with silver paint or galvanized finish. Air
vent to rise at least 9½" and have a stainless steel front and back
for ease of cleaning.
Filters to be stainless steel with aluminum mesh, easy to remove
and dishwasher-safe.
Blower will connect directly to 3¼" x 10" rectangular duct (6" round
duct using a transition). Blower discharge to be convertible to
accommodate ductwork from LEFT, RIGHT, or BELOW and have
7½" side-to-side adjustment.
Motor shall be mounted to blower assembly with grease resistant
anti-vibration mounts, be removable, and lifetime lubricated.
Unit to include Heat Sentry
TM
, to adjust blower speed to HIGH in
case of excess heat and must accept an optional remote control
activation button.
Downdraft system shall operate on 120 VAC and be able to be
plugged into a standard grounded outlet. It will have an infinite speed
blower control.
Air delivery shall be no less than 500 CFM. Air delivery rating shall
be certified by HVI. Downdraft blower system to be U.L. listed.
MODELS RMDD3004, RMDD3604,
RMDD4804
DOWNDRAFT
02K 99043189F
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 1-800-558-1711 www. Broan-NuTone.com
Venmar Ventilation ULC, 550 Lemire Blvd., Drummondville, QC, Canada J2C 7W9 1-877-896-1119 www.broan.ca
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures
prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1 in. static pressure,
based on tests conducted in a state-of-the-art test laboratory. Sones are a measure
of humanly-perceived loudness, based on laboratory measurements.
* Max. blower CFM indicates the performance of the hood blower in open air.
HVI PERFORMANCE
Duct Orientation Size
Sones CFM
Normal High Normal
High
0.25 in. w.g.
High
0.1 in. w.g.
Vertical - Rectangular 3¼ in. x 10 in
. 3.0 10.5 230
480
500