Specification Sheet
SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
40J 99043304B
Especially designed to protect the exterior base of a
custom hood. Fit RMIP inserts.
FEATURES
•
Cabinet mount
_
custom application
•
Stainless Steel Finish
•
Adjustable depth to fit into cabinet openings as shown in
chart (front to back)
•
Fit custom hood nominal widths: 36’’, 42’’, 48’’ or 60’’
•
Wipes clean easily
TO ORDER
RML3336, RML3336S,
RML3342, RML3342S,
RML4548, RML4548S,
RML4560
AND
RML 4560S LINERS
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-800-543-8687)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
HA0025
Refer to table below to find the right liner part number for
your insert and for width of the custom hood.
DIMENSIONS
* Dimension does not include 3/8’’ wide flange.
Liner Model Insert Model Custom Hood Adjustable Depth* Cut-out
Nominal Width Fits into cabinet openings of Width A* Width B
Without Backboard With Backboard
RML3336 RMIP33 36” 23 1/2” to 26 1/2” 23 1/8” to 26 1/8” 34 3/8” 32 1/2”
RML3342 RMIP33 42” 23 1/2” to 26 1/2” 23 1/8” to 26 1/8” 40 3/8” 32 1/2”
RML4548 RMP45 48” 23 1/2” to 26 1/2” 23 1/8” to 26 1/8” 46 3/8” 44 1/2”
RML4560 RMIP45 60” 23 1/2” to 26 1/2” 23 1/8” to 26 1/8” 58 3/8” 44 1/2”
RML3336S RMIP33 36” 22 7/8” to 25 7/8” 22 1/2” to 25 1/2” 34 3/8” 32 1/2”
RML3342S RMIP33 42” 22 7/8” to 25 7/8” 22 1/2” to 25 1/2” 40 3/8” 32 1/2”
RML4548S RMIP45 48” 22 7/8” to 25 7/8” 22 1/2” to 25 1/2” 46 3/8” 44 1/2”
RML4560S RMIP45 60” 22 7/8” to 25 7/8” 22 1/2” to 25 1/2” 58 3/8” 44 1/2”
The INSIDE DEPTH shown in the table above assumes a minimum cabinet backboard thickness of 3/8”.
4”
16-3/8”
B
A*
Adjustable Depth*
(See Chart)
17-1/16”
3-1/2”