Dimensions Guide

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
01A 99044081C
TYPICAL SPECIFICATION
Range hood shall be Broan RP2 Series.
Unit shall have a backdraft damper and be ducted
vertically (horizontally) to the outside.
Unit shall have washable micromesh aluminum lters with
special antimicrobial protection.
Unit shall have a permanently lubricated, dual centrifugal
blower resiliently mounted and controlled with a two-speed
control. RPM not to exceed 1625.
Hood shall have a two-speed rocker control and a
separate, two-position light switch. Sides shall be straight
and bottom hemmed - with no sharp edges. Stainless steel
shall be 24-gauge, 430 series.
Air delivery shall be no less than 440 cfm and sound levels
no greater than 7.0 Sones. All air and sound ratings shall
be certied by HVI.
Unit shall be U.L. and cU.L. listed.
Designed to meet the performance needs of
today's conventional cooking appliances.
FEATURES
•
Two-speed blower control, convenient color-matched
rocker
•
Two-position light switch for "bright" or "night-light"
illumination
•
Dual halogen lamps with stainless steel trim rings
(50W GU10 - MR16 lamps, purchase separately)
•
High efciency dual centrifugal blower with resilient
anti-vibration motor mounts
•
Broan Heat Sentry
TM
- automatically turns blower to
high speed when excess cooking heat is detected
•
Two washable, micromesh aluminum grease lters
with antimicrobial protection that inhibits the formation
of odor-producing bateria and protects lter from
discoloration
•
Hemmed bottom for safety and good looks
•
Damper/duct connector included
•
Professional styling in Stainless Steel, Black and White
•
Available in 30" and 36" widths
•
Non-Ducted Recirculation Kit - NDK358 Series
- Order to match color and size of hood
•
Replacement lters (package of 2):
- Grease with Microban - 97017456 (BPAPFA)
- Grease without Microban - 97017455 (BPRPFA)
- Non-Ducted - 97007662 (88F)
SPECIFICATIONS
MODEL RP2 SERIES
PRO-STYLE
RANGE HOOD
SONES CFM
VOLTS AMPS RPM VER. HOR. VER. HOR. DUCT
120 1.9 1625 7.0 7.0 440 440 3¼" x10"
HVI-2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available
to consumers. Product performance is rated at
0.1 in. static pressure, based on tests conducted
in a state-of-the-art test laboratory. Sones are
a measure of humanly-perceived loudness,
based on laboratory measurements.
NDK358 SERIES
NON-DUCT
RECIRCULATION
KIT
RP2 SERIES
PRO-STYLE
RANGE HOOD