Instruction Manual

ManualsBrandsBroan ManualsAccessories20-Minute Push Button Timer

WALL CONTROLS

All Broan wall controls are user-friendly. ey were created for people who want to maximise the benets of their residential ventilation unit. With

Broan wall controls, the homeowner’s specic needs are fullled.

MAIN CONTROLS

Due to the constant evolution of our technologies, it may be possible that some control functions are not compatible to some earlier

unit models. For more details, please refer to the compatibility chart on last page.

VT9W

Part no. VT9W

• 5 manual modes: RECIRC, 20MIN/H, CONT, SMART and

SMART ECO;

• Dehumidistat: When indoor humidity is too high and exceed the set

point, unit will exchange air in high speed to take care of excess

humidity. e humidity set point can be changed and you may refer to

the Installation and Owner Guide;

• ree defrost cycling settings: Standard, Discretion which will

defrost at the speed of operation either high or low, ans Plus, which will

defrost in high speed for a longer period of time for very cold climate;

• Maintenance indicator;

• At installation, use the VT9W main control to perform electronic

balancing, without using balancing dampers.

O M

MODE



CONT

Press the MODE key to choose the operation mode of the

ventilation unit (except TURBO mode).

Operating Mode will then appear on LCD screen

(STANDBY, RECIRC, 20 min/h, CONT, SMART).

STANDBY

Put the unit on stand-by mode, so it will only respond to

override wall controls (if present). On LCD screen, only

the House is visible showing the control is powered on.

is is the factory set default mode.

RECIRC

Air is recirculated inside the house on high speed.

 /

e ventilation unit exchanges air intermittently on a one

hour cycle as follows: OFF for 40 min. (or recirculation for

40 min. on low or high speed, see Settings) and then

exchange air during 20 min. on low speed. Repeat cycle

aer the 20 min. of air exchange.

CONT

Air is exchanged with the outdoors at the minimum

blower speed.

SMART

Air exchange is managed according to indoor humidity measured by the

wall control and outdoor temperature. In SMART mode, the SMART

icon appears as well as the current operating mode called by SMART (For

more details about SMART features, refer to the User Guide Main and

Auxiliary Wall Controls available at www.broan.com).

TURBO



Press the TURBO function key to turn the unit on air

exchange in high speed during 4 hours, then, the unit

will get back to its previous operation mode.

VC0177

Summary of content (5 pages)

PAGE 1
WALL CONTROLS MAIN CONTROLS Due to the constant evolution of our technologies, it may be possible that some control functions are not compatible to some earlier unit models. For more details, please refer to the compatibility chart on last page. All Broan wall controls are user-friendly. They were created for people who want to maximise the benefits of their residential ventilation unit. With Broan wall controls, the homeowner’s specific needs are fulfilled.
PAGE 2
MAIN CONTROLS (CONT’D) Operation Modes SMART Mode Our latest innovation! This mode optimizes automatically the ventilation functions to ensure reaching an unsurpassed comfort in the house. VENT Mode In this mode, the air exchange with the outside is performed with the speed (OFF, MIN or MAX) or with a 20, 30 or 40-minute per hour cycle, according to the user’s choice. RECIRC Mode In this mode, the user decides to recirculate the air inside his house (OFF, MIN, MAX or OFF, MAX, according to the unit).
PAGE 3
MAIN CONTROLS (CONT’D) MAX MIN INTERMITTENT VT4W VC0070 VT4W Part no. VT4W The light indicator of this wall control shows clearly in wich operating mode the unit is. This push-button control has three functions: • Intermittent (unit is OFF during 40 minutes and then perform low speed air exchange with the outdoors during 20 minutes) • Min (low speed air exchange) • Max (high speed air exchange) NOTE: Wall control appearance may slightly vary. VC0180 VT6W Part no.
PAGE 4
AUXILIARY CONTROLS VC0183 VC0183 VB60W push button Part no. VB60W VB20W Part no. VB20W This timer allows the unit to turn on high speed during 20, 40 or 60 minutes to expel rapidly indoor stale air. Within 2 seconds, press once for 20 minutes, twice for 40 minutes or three times for a 60-minute activation. Press another time to deactivate. This timer allows the unit to provide 20 minutes of high speed ventilation at the push of a button, to expel rapidly indoor stale air.
PAGE 5
WALL CONTROL COMPATIBILITY CHART The VB20W push-button timer is compatible with all units, whereas the 59W crank-timer is compatible with all units, except for the ERVS100S unit. Model no. Name ERV140TE ERV140TE HRV160TE HRV160TE HRV160T HRV160T ERV200TE, HRV200TE, ERV250TE & HRV250TE ERV200TE, HRV200TE, ERV250TE & HRV250TE ERV70T, ERV70S ERV70T, ERV70S HRV80T, HRV80S HRV80T, HRV80S HRV90T, HRV90S HRV90T, HRV90S VT9W VT8W version 4.04 and up (NOTE 1) VT7W version 2.