Submittal Sheet

DUAL EXTERIOR HOOD
INSTALLATION KIT
VR0003
TWO EXTERNAL VENTS IN ONE!
Imagine... Only one hole to cut in the exterior wall to perform an
outdoor connection for an HRV or ERV. Introducing the simplest way to
perform the outdoor connection for units that have a flow rate of less
than 110 CFM (0.4 in. w.g.) : the Dual Exterior Hood Kit.
• Only one 6” diameter hole in the exterior wall
• Aesthetic white polypropylene dual outdoor port
• Transition fits both 5” or 6” diameter
insulated flexible ducts
• Hardware included
• Light materials, handy design
• Outdoor connection performed in half of the time
• Complies with ASHRAE 62.2-2016
The revolutionary design of the Dual Exterior Hood Kit simplifies the
installation because there is only one hole to cut in the exterior wall. In
fact, every installer knows that locating efficiently one outdoor port is
easier (and faster) than locating two. And moreover, there is almost no
cross-contamination between the exhaust and intake airflows!
Available at:
Part number: VTYIK1
0.00
0.05
0.10
0.15
0.20
0.25
0 20 40 60 80 100 120
VG0075A
VG0077A
0
0.05
0.10
0.15
0.20
0.25
0 20 40 60 80 100 120
Pressure drops (air intake)
Pressure drops (air exhaust)
Inch water gauge
Air ow (cfm)
Inch water gauge
Air ow (cfm)