Spec Sheet

Broan Hartford, Wisconsin www.broan.com 800-558-1711
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
SPECIFICATION SHEET
02B 99045901B
MODEL XB110L1
VENTILATION FAN WITH LIGHT
FEATURES
ULTRASMART™ DC Motor and Control Technology
• DC motor for efficiency well beyond ENERGY STAR
®
requirements.
• Can be used to comply with ASHRAE 62.2, LEED, ENERGY STAR
®
for Homes and CA Title 24.
• Powerful operation maintained over a wide range of real-world
installations (CFM ratings maintained through at least 0.25” static
pressure).
• Rated for Continuous Operation.
ULTRASILENT™ Sound Technology
• HVI certified, best-achievable <0.3 Sone level provides nearly
silent operation for a relaxing environment.
• State-of-the-art blower and duct outlet design smooths airflow.
• High tech DC motor designed for nearly silent operation.
ULTRALUCENT™ Lighting Technology
LIGHTING / GRILLE:
• Highly efficient, 18 Watt, integrated LED, dimmable
• LED lasts up to 25,000 hours
• Unique, low profile design for wide light pattern
• Even lens diffusion eliminates hotspots
TO OPERATE FAN AND LIGHT:
• Use only an ON/OFF or timer switch to operate the fan.
• Use only an ON/OFF switch, timer switch or relay-switch to
operate the LED light.
• The LED light can be used with some dimmable switches (see
below).
• Both the fan and LED light can be put on one switch.
DIMMING CONTROLS :
• May not be compatible with all dimmer controls
• Each application is unique and various factors such as load,
common neutrals or other electrical products on the circuit can, in
certain instances, cause variance in system performance.
• Dimmer model numbers vary slightly depending on color,
packaging type, etc. such that variations of Model numbers may
be suitable. Consult dimming system manufacturer for additional
support in operation
* For a list of compatible controls, see broan.com.
ULTRAQUICK™ Installation Technology
• Unique telescoping mounting frame fits through retrofit drywall
opening to allow easy installation from the room side. No attic
access needed!
• Captive screws allow for easy new construction installation.
• Mounting frame positioning tabs provide easy vertical positioning
for new construction.
• Easy to insert and remove snap-in housing. No screws required!
• Easy to insert and remove snap-in blower.
• Inside or outside duct connector and knockout plate mounting
provides flexibility for new construction or retrofit.
U.L. Listed for use over bathtubs and showers when connected to a
GFCI protected branch circuit (ceiling mount only).
U.L. Listed for use in insulated ceilings (Type IC).
Use only ON/OFF switch, mechanical timer or relay-switched
control.
3-year warranty.
DIMENSIONS (Inches)
JA8-2019
SPANS 14 TO
24 ON-CENTER
FRAMING