Technical data

General specifications
The following table lists the system specifications for the Brocade 300.
General Specifications TABLE 7
Specification Description
Autoconfiguring port types F_Port, FL_Port, M_Port, N_Port, and E_Port
System architecture Nonblocking shared-memory switch
System processor Power PC 440EPx,667 MHz CPU
ANSI Fibre Channel protocol FC-PH ( Fibre Channel Physical and Signaling Interface standard )
Modes of operation Fibre Channel Class 2, Class 3, Class F
Fabric initialization Complies with FC-SW-2 6.6
FC-IP (Fibre Channel over IP) Complies with FC-IP 2.3 of FCA profile
Aggregate switch I/O bandwidth 384 Gbps if all 24 ports running at 8 Gbps, full duplex
Port-to-port latency Less than 700 nanoseconds with no contention (destination port is free)
The following table lists the EMC (electromagnetic compatibility) for the Brocade 300.
EMC specificationsTABLE 8
Country Safety EMC
United States Bi_Nat UL/CSA 60950-1 1st Ed or latest ANSI C63.4
Canada Bi_Nat UL/CSA 60950-1 1st Ed or latest ICES-003 Class A
Japan CISPR22 and JEIDA (Harmonics)
European Community EN60950-1 or latest EN55022 and EN55024
Australia/New Zealand EN55022 or CISPR22 or AS/NZS CISPR22
Argentina IEC60950-1 or latest
Russian Federation IEC60950-1 or latest 51318.22-99 and 51318.24.99
Korea KN22 and KN24
China (PS only) GB4943-2001 and GB9254-1998 or latest GB17625.1-2012 or latest
General specifications
36 Brocade 300 Hardware Reference Manual
53-1000862-06