Technical data

Web Tools Administrator’s Guide 79
53-1002934-02
Port management overview
6
On selecting an FCIP tunnel, the following circuit details with the circuit properties are displayed:
• Circuit Number
• Tunnel ID
• Administrator Status
• Operational Status
• GigEPort
• Source IP
• Gateway
• VLAN ID
• MTU Size
• Compression Mode
• Data L2COS Value
• DSCP Data
• IKE Policy Number
• IPsec Policy Enabled
• Keep Alive Timeout
• MaximumCommunicationRate
• MinimumCommunicationRate
• MaxRetransmitRate
• MinRetransmitRate
• Metric
• Pre-Shared key
• QOS Mapping
• Selective Ack
Ports Explorer tree
The Ports Explorer tree displays on the left side of the window. Items in the tree are displayed as
follows:
• Switches—Switch ID, with switch name in parentheses; for example, 3(MapsSW_202)
• Blades—Slot number of the blade, with blade ID in parentheses; for example, Slot 7(24)
• Ports—Port number; for example, Port 2
• 10G SFP ports— A yellow triangle badge displays to visually distinguish the 10Gbps SFP+ ports.
Actions
The Actions list contains options for all the tasks you can perform on the selected ports. If you
select more than one port, options are available for only the tasks that you can perform on all of
the selected ports. Options are unavailable if they are not applicable to the selected ports.
Port information displays in either a table of ports or information about a specific port, depending
on your selection. If you select a slot or switch, the system displays a table of all the ports for the
slot or switch. If you select a port, the system displays detailed information about the port.