Technical data

80 Web Tools Administrator’s Guide
53-1002934-02
Port management overview
6
Subtabs
You can view either Basic Mode or Advanced Mode, and view the subtabs that contain additional
information about the port. The available subtabs depend on the type of port selected.
To view basic mode, select View > Basic. When viewing detailed information about a port, Basic
Mode provides these subtabs:
• General—Under this tab, the Actions list provides the following options:
- Edit
- Rename
- Enable/Disable
- Persistent Enable/Persistent Disable
• SFP—Physical ports only (FC, CEE, and GbE)
- Basic information about the port equipment
• QSFP—Quad Small Form-factor Pluggable ports
- Basic Information about the port.
- UnitNumber
- ChannelIndex
- DeviceTech
• Port Statistics—All ports
- Basic port information and statistics
Note that on the Port Statistics subtab, you can view either absolute values or deltas for
port statistics. Viewing the deltas is useful if you want to view current port trends. To reset
the counters on the port statistics, click the Clear Counters button.
FCIP statistics for a GbE port are the accumulated statistics of all the FCIP tunnels for that
GbE port.
• IP Interfaces—GbE ports only
• IP Routes—GbE ports only
To view advanced mode, select View > Advanced. When viewing detailed information about a port,
the Advanced Mode provides these additional subtabs: