Technical data

Web Tools Administrator’s Guide 97

53-1002934-02

Configuring port octet speed combination

7. Select an F_Port or U_Port from the device tree or Port List table.

8. Select ALPA Map from the Actions list.

The Port WWN Map dialog box launches listing the Port WWN to ALPA Map with the host. The

Port WWN map automatically populates.

FIGURE 16 ALPA Map dialog box

9. Optional: Click Remove All to clear all of the Port WWN maps.

Configuring port octet speed combination

The Port Admin tab provides an option to set the port octet speed combination. This option is

available only on the following platforms:

• Brocade DCX 8510-8 and DCX 8510-4 with the FC8-32E, FC8-48E, FC16-32, and FC16-48 port

blades

• Brocade 6510

• Brocade 6520

The ports on these hardware models are segregated into 8 port octets. The port octet speed

combination is applied to the eight ports to which the selected port belongs. Based on this port

octet speed combination, the speed options will be available in the Port Configuration wizard.

NOTE

For FC8-32E and FC8-48E port blades, the port octet speed combination is Auto or Fixed

8G|4G|2G.

You can change the octet combination of a blade or switch. The octet speed must be set

consistently across all members of the port octet.

TABLE 10 Port octet speed combinations

Port octet in combination Available port speeds within the octet

1 Auto or Fixed 16G|8G|4G|2G

2 Auto or Fixed 10G|8G|4G|2G

3 Auto or Fixed 16G|10G