Technical data

Web Tools Administrator’s Guide 103
53-1002934-02
GigE port modes
6
NOTE
You must install the FX8-24 DCX Extension Blade in a slot containing 10GE license to configure the
mode.
1. Select Port Admin > GigE Ports.
2. Select View > Advanced.
3. Select a slot from the GigE Ports Explorer panel.
4. Select one of the following modes from Mode under the Actions list.
- 1G - To enable ge0 through ge9 ports.
- 10G - To enable xge0 and xge1 ports.
- Dual - To enable ge0 through ge09 and xge0 ports.
5. Click Yes on the confirmation dialog box.