Technical data

Web Tools Administrator’s Guide 169
53-1002934-02
Access Gateway policy modification
12
FIGURE 33 Access Gateway Auto Rebalancing
5. Click Refresh.
6. Under the Access Gateway Mode section, do the following:
• Select the N Port Auto Rebalancing check box to enable N_Port rebalancing.
• Select F Port Auto Rebalancing check box to enable F_Port rebalancing.
• Click Manual Balancing and a confirmation dialog box displays. Click Yes to change F
Port-N Port Mapping or click No to cancel the changes.
7. Cl ick Apply to apply the changes.