Technical data

210 Web Tools Administrator’s Guide
53-1002934-02
TACACS+ management
16
6. Click OK to return to the AAA Service tab.
7. Cl ick Apply.
Removing Active Directory service
To remove an Active Directory server, perform the following steps.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 33.
2. Select the AAA Service tab.
3. Select a server from the ADLDAP Configuration list.
4. Click Remove.
NOTE
The server is not deleted until you apply the changes from the AAA Services tab.
5. Click Apply in the AAA Services tab.
A confirmation dialog box displays, warning you that you are about to remove the selected
server.
6. Click Yes in the confirmation dialog box.
TACACS+ management
TACACS+ provides user authentication and authorization using TACACS as the authentication
protocol. You can add, remove, and modify settings of TACACS+ Server.
Enabling and disabling TACACS+
At least one TACACS+ server must be configured before you can enable TACACS+.
To enable or disable TACACS+, perform the following steps.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 33.
2. Select the AAA Service tab.
3. To enable TACACS+, select TACACS+ from the Primary AAA Service drop-down menu.
4. Select None, Switch Database when TACACS+ Login Failed, or Switch Database when TACACS+
Login Timeout from the Secondary AAA Service menu.
NOTE
To disable TACACS+, select Switch Database from the Primary AAA Service menu and select
None from the Secondary AAA Service menu.
5. Click Apply.