Technical data

Web Tools Administrator’s Guide 211
53-1002934-02
TACACS+ management
16
Configuring TACACS+
To enable TACACS+, perform the following steps.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 33.
2. Select the AAA Service tab.
3. Click Add to configure TACACS+ service.
4. Select TACACS+ from Server Type.
5. Enter the Server, Port, Timeout(s), Secret String details in the appropriate fields.
6. Select CHAP or PAP from the Authentication list.
7. Cl ick OK.
The server details display in the TACACS+ Configuration list.
8. Click Apply.
Modifying TACACS+
To change the parameters of a TACACS+ service that is already configured, perform the following
steps.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 33.
2. Select the AAA Service tab.
3. Select a server from the TACACS+ Configuration list.
4. Click Modify.
The RADIUS/ADLDAP/TACACS+ Configuration dialog box displays.
5. Enter new values for the fields you want to modify.
6. Click OK to return to the AAA Service tab.
7. Cl ick Apply.
Removing TACACS+
To remove a TACACS+ server, perform the following steps.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 33.
2. Select the AAA Service tab.
3. Select a server from the TACACS+ Configuration list.
4. Click Remove.
NOTE
The server is not deleted until you apply the changes from the AAA Services tab.
5. Click Apply in the AAA Service tab.