Technical data

248 Web Tools Administrator’s Guide
53-1002934-02
Displaying LAG information
18
The Connected Devices tab displays information about devices connected to the switch
(Figure 48). Six columns of information are displayed:
• Device WWN displays the WWN of the connected device.
• Device MAC displays the MAC address of the connected device.
• Connected Peer Type displays the port type on the connected device.
• Is Directly Connected indicates whether or not the device is directly connected to the
trunk.
• FCoE Port MAC displays the FCoE port MAC address.
• Switch Port displays the switch port WWN.
Displaying LAG information
To display LAG information, perform the following steps.
1. Select the DCB tab on the Switch Administration panel.
2. Select the Link Aggregation tab.
The LAG information displays.
Displaying VLAN information
To display VLAN information, perform the following steps.
1. Select the DCB tab on the Switch Administration window.
2. Select the VLAN tab.
The VLAN information displays.
Displaying FCoE login groups
To display FCoE login group information, perform the following steps.
1. Select the DCB tab on the Switch Administration window.
2. Select the FCoE Login tab.
The FC0E login group information displays.
Displaying QoS information
To display QoS information, perform the following steps.
1. Select the DCB tab on the Switch Administration window.
2. Select the QoS tab.