Technical data

3-2 Brocade SilkWorm 4100 Hardware Reference Manual
Publication Number: 53-0000563-02
Interpreting LED Activity
3
LEDs on the Port Side of the Switch
The port side of the switch has the following LEDs:
• One system status LED (above) on the left side
• One power status LED (below) on the left side
• One port status LED below pairs of Fibre Channel ports (left LED)
• One port speed LED below pairs of Fibre Channel ports (right LED)
Figure 3-1 shows the port side of the SilkWorm 4100.
Figure 3-1 LEDs on Port Side of SilkWorm 4100
Note
The pairs of port LEDs for all 32 ports are arrayed below the bottom of row ports. The
pairs of port LEDs are located in the array in the same relative positions as the ports.
scale: 5/16" = 1"
0
4
3
7
1
5
2
6
8
12
11
15
9
13
10
14
16
20
19
23
17
21
18
22
24
28
27
31
25
29
26
30
Port Side View
System
Status
LED
Power
Status
LED
Speed
LED
Serial
Port
scale: 3/4" = 1"
Link
LED
0
4
3
7
1
5
2
6
LEDs
for
bottom
ports
Port Speed
LEDs
Port Status
LEDs
To p
port
LEDs
Switch ID
Pull-out
Ta b
Ethernet
Port
FC Ports
(0-7)