Technical data

Brocade SilkWorm 4100 Hardware Reference Manual A-11
Publication Number: 53-0000563-02
Regulatory Compliance
A
Laser Compliance
This equipment contains Class 1 laser products and complies with FDA Radiation Performance
Standards, 21 CFR Subchapter I and the international laser safety standard IEC 825-2.
RTC Battery
Electrical Safety
Caution
Use only optical transceivers that are qualified by Brocade Communications Systems and comply with
the FDA Class 1 radiation performance requirements defined in 21 CFR Subchapter I, and with IEC
825-2. Optical products that do not comply with these standards might emit light that is hazardous to the
eyes.
Caution
Do not attempt to replace the real-time clock (RTC) battery. There is danger of explosion if the battery is
incorrectly replaced or disposed of. Contact your switch supplier if the real-time clock begins to lose
time.
Caution
This switch might have more than one power cord.To reduce the risk of electric shock, disconnect both
power cords before servicing.
Caution
Connect the power cord only to a grounded outlet.
Apparaten skall an slutas till jordat nattutag.
Caution
This product is designed for an IT power system with phase-to-phase voltage of 230V. After operation of
the protective device, the equipment is still under voltage if it is connected to an IT power system.