Manualshelf

Technical data

ManualsBrandsBrocade Communications Systems ManualsSwitch4100
121122123124125126127128129130
Fabric OS Administrator’s Guide 6-5
Publication Number: 53-0000518-09
Viewing Routing Path Information
6
Viewing Routing Path Information
The topologyShow and uRouteShow commands provide information about the routing path.
1. Connect to the switch and log in as admin.
2. Enter the topologyShow command to display the fabric topology, as it appears to the local switch.
The following entries appear:
Local Domain ID Domain number of the local switch.
Domain Domain number of the destination switch.
Metric Cost of reaching the destination domain.
Name The name of the destination switch.
Path Count The number of currently active paths to the destination domain.
Hops The maximum number of hops to reach the destination domain.
Out Port The Port to which the incoming frame will be forwarded in order to
reach the destination domain.
In Ports Input ports that use the corresponding Out Port to reach the destination
domain.
Total Bandwidth The maximum bandwidth of the out port.
Bandwidth Demand The maximum bandwidth demand of the in ports.
Flags Always “D”, indicating a dynamic path.