Technical data

Fabric OS Administrator’s Guide 13-15
Publication Number: 53-0000518-09
Creating and Maintaining Zones
13
To remove devices (members) from a zone
1. Connect to the switch and log in as admin.
2. Enter the zoneRemove command.
3. Enter the cfgSave command to save the change to the defined configuration.
Example
To delete a zone
1. Connect to the switch and log in as admin.
2. Enter the zoneDelete command.
3. Enter the cfgSave command to save the change to the defined configuration.
Example
To view a zone in the defined configuration
1. Connect to the switch and log in as admin.
2. Enter the zoneShow command.
The following example shows all zones beginning with A, B, or C:
If no parameters are specified, the entire zone database (both the defined and effective configuration)
is displayed.
switch:admin> zoneremove “greenzone”, “1,2”
switch:admin> zoneremove “redzone”, “21:00:00:20:37:0c:72:51”
switch:admin> zoneremove “bluezone”, “4,6; 21:00:00:20:37:0c:66:23
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y
switch:admin> zonedelete “bluezone”
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y
switch:admin> zoneshow “[A-C]*”
zone: Blue_zone 1,1; array1; 1,2; array2
zone: Bobs_zone 4,5; 4,6; 4,7; 4,8; 4,9