Technical data

F-4 Fabric OS Administrator’s Guide
Publication Number: 53-0000518-09
Upgrading Firmware in Single CP Mode
F
12. Reboot the standby CP blade (if you set the option to reboot automatically to no in step 9).
13. Log in to the same CP blade and enter the firmwareDownloadStatus command to verify firmware
has downloaded successfully and has either committed or is in the process of doing so. (If you set
the option to do auto commit after reboot to no in step 9, you must enter the firmwareCommit
command manually.)
14. Enter the haFailover command to make the current CP blade active (with the updated firmware).
15. Repeat step 1 through step 13 on the other CP blade if the firmware versions are different.