Technical data

3-34 Fabric OS Administrator’s Guide

Publication Number: 53-0000518-09

Configuring Secure File Copy

Sample view of the SNMP MIB trap setup

Configuring Secure File Copy

You can use the configure command to specify that secure file copy (scp) be used for configuration

uploads and downloads.

Example

Setting the Boot PROM Password

The boot PROM password provides an additional layer of security by protecting the boot PROM from

unauthorized use. Setting a recovery string for the boot PROM password enables you to recover a lost

boot PROM password by contacting your switch service provider. Without the recovery string, a lost

boot PROM password cannot be recovered.

switch:admin> snmpmibcapshow

FA-MIB: YES

FICON-MIB: YES

HA-MIB: YES

SW-TRAP: YES

swFCPortScn: YES

swEventTrap: YES

swFabricWatchTrap: YES

swTrackChangesTrap: YES

FA-TRAP: YES

SW-EXTTRAP: YES

HA-TRAP: YES

fruStatusChanged: YES

cpStatusChanged: YES

fruHistoryTrap: YES

switch:admin> configure

Not all options will be available on an enabled switch.

To disable the switch, use the “switchDisable” command.

Configure...

System services (yes, y, no, n): [no] n

ssl attributes (yes, y, no, n): [no] n

http attributes (yes, y, no, n): [no] n

snmp attributes (yes, y, no, n): [no] n

rpcd attributes (yes, y, no, n): [no] n

cfgload attributes (yes, y, no, n): [no] y

Enforce secure config Upload/Download (yes, y, no, n): [no] y

switch:admin>